Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2025-09-06 19:56:34
From: Ken Wellsch
Description: NetBSD/sparc64 11.0_BETA on Sun Fire V245
Rebooting with command: boot /pci@1e,600000/pci@0/pci@8/pci@0/scsi@8/disk@0,0:a
Boot device: /pci@1e,600000/pci@0/pci@8/pci@0/scsi@8/disk@0,0:a  File and args: 
NetBSD IEEE 1275 Multi-FS Bootblock
Version $NetBSD: bootblk.fth,v 1.18 2025/02/28 09:07:12 andvar Exp $
>> NetBSD/sparc64 OpenFirmware Boot, Revision 1.20 (Fri Sep  5 09:21:53 UTC 2025)
=0xcc8080
Loading netbsd: 13402176+514208+326136 [758496+497257]=0xf00560
[   1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[   1.0000000]     2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[   1.0000000]     2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
[   1.0000000]     2024, 2025
[   1.0000000]     The NetBSD Foundation, Inc.  All rights reserved.
[   1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[   1.0000000]     The Regents of the University of California.  All rights reserved.

[   1.0000000] NetBSD 11.0_BETA (GENERIC) #0: Fri Sep  5 09:21:53 UTC 2025
[   1.0000000]  [_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/sparc64/compile/GENERIC
[   1.0000000] total memory = 4096 MB
[   1.0000000] avail memory = 4001 MB
[   1.0000000] mainbus0 (root): SUNW,Sun-Fire-V245 (Sun Fire V245): [_HOSTID_XXXXX]
[   1.0000000] cpu0 at mainbus0: SUNW,UltraSPARC-IIIi @ 1504 MHz, CPU id 0
[   1.0000000] cpu0: manuf 3e, impl 16, mask 34
[   1.0000000] cpu0: system tick frequency 20 MHz
[   1.0000000] cpu0: 32K instruction (32 b/l), 64K data (32 b/l), 1024K external (64 b/l)
[   1.0000000] cpu1 at mainbus0: SUNW,UltraSPARC-IIIi @ 1504 MHz, CPU id 1
[   1.0000000] cpu1: manuf 3e, impl 16, mask 34
[   1.0000000] cpu1: system tick frequency 20 MHz
[   1.0000000] cpu1: 32K instruction (32 b/l), 64K data (32 b/l), 1024K external (64 b/l)
[   1.0000000] memory-controller at mainbus0 not configured
[   1.0000000] memory-controller at mainbus0 not configured
[   1.0000000] pyro0 at mainbus0: "Fire", rev 3, ign 780, bus A 2 to 14
[   1.0000000] pyro0: pci0 at pyro0
[   1.0000000] ppb0 at pci0 dev 0 function 0: PLX Technology product 8532 (rev. 0xba)
[   1.0000000] ppb0: PCI Express capability version 1 <Upstream Port of PCI-E Switch>
[   1.0000000] pci1 at ppb0 bus 3
[   1.0000000] ppb1 at pci1 dev 1 function 0: PLX Technology product 8532 (rev. 0xba)
[   1.0000000] ppb1: PCI Express capability version 1 <Downstream Port of PCI-E Switch> x4 @ 2.5GT/s
[   1.0000000] pci2 at ppb1 bus 4
[   1.0000000] ppb2 at pci2 dev 0 function 0: Acer Labs M5249 Hypertransport to PCI Bridge (rev. 0x00)
[   1.0000000] ppb2: PCI Express capability version 1 <PCI-E to PCI/PCI-X Bridge>
[   1.0000000] pci3 at ppb2 bus 5
[   1.0000000] ohci0 at pci3 dev 28 function 0: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03)
[   1.0000000] ohci0: interrupting at ivec 780
[   1.0000000] ohci0: OHCI version 1.0, legacy support
[   1.0000000] usb0 at ohci0: USB revision 1.0
[   1.0000000] ohci1 at pci3 dev 28 function 1: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03)
[   1.0000000] ohci1: interrupting at ivec 780
[   1.0000000] ohci1: OHCI version 1.0, legacy support
[   1.0000000] usb1 at ohci1: USB revision 1.0
[   1.0000000] ehci0 at pci3 dev 28 function 3: Acer Labs M5239 USB 2.0 Host Controller (rev. 0x01)
[   1.0000000] ehci0: interrupting at ivec 781
[   1.0000000] ehci0: 2 companion controllers, 3 ports each: ohci0 ohci1
[   1.0000000] usb2 at ehci0: USB revision 2.0
[   1.0000000] ebus0 at pci3 dev 30 function 0: Acer Labs product 1575, revision 0x00
[   1.0000000] rtc0 at ebus0 addr 70-73: mc146818 compatible time-of-day clock: m5823
[   1.0000000] aceride0 at pci3 dev 31 function 0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc8)
[   1.0000000] aceride0: using ivec 2f84 for native-PCI interrupt
[   1.0000000] atabus0 at aceride0 channel 0
[   1.0000000] atabus1 at aceride0 channel 1
[   1.0000000] ppb3 at pci1 dev 2 function 0: PLX Technology product 8532 (rev. 0xba)
[   1.0000000] ppb3: PCI Express capability version 1 <Downstream Port of PCI-E Switch> x4 @ 2.5GT/s
[   1.0000000] pci4 at ppb3 bus 6
[   1.0000000] ppb4 at pci1 dev 8 function 0: PLX Technology product 8532 (rev. 0xba)
[   1.0000000] ppb4: PCI Express capability version 1 <Downstream Port of PCI-E Switch> x8 @ 2.5GT/s
[   1.0000000] pci5 at ppb4 bus 7
[   1.0000000] ppb5 at pci5 dev 0 function 0: PLX Technology PEX 8114 PCIe-to-PCI/PCI-X Bridge (rev. 0xaa)
[   1.0000000] ppb5: PCI Express capability version 1 <PCI-E to PCI/PCI-X Bridge>
[   1.0000000] pci6 at ppb5 bus 8
[   1.0000000] mpt0 at pci6 dev 8 function 0: Symbios Logic 53c1020/53c1030 (rev. 0x08)
[   1.0000000] mpt0: interrupting at ivec 2f94
[   1.0000000] scsibus0 at mpt0: 16 targets, 8 luns per target
[   1.0000000] mpt1 at pci6 dev 8 function 1: Symbios Logic 53c1020/53c1030 (rev. 0x08)
[   1.0000000] mpt1: interrupting at ivec 2f95
[   1.0000000] scsibus1 at mpt1: 16 targets, 8 luns per target
[   1.0000000] ppb6 at pci1 dev 9 function 0: PLX Technology product 8532 (rev. 0xba)
[   1.0000000] ppb6: PCI Express capability version 1 <Downstream Port of PCI-E Switch> x4 @ 2.5GT/s
[   1.0000000] pci7 at ppb6 bus 9
[   1.0000000] ppb7 at pci7 dev 0 function 0: ServerWorks BCM5714/BCM5715 Integral PCI-E to PCI-X Bridge (rev. 0xb5)
[   1.0000000] ppb7: PCI Express capability version 1 <PCI-E to PCI/PCI-X Bridge>
[   1.0000000] pci8 at ppb7 bus 10
[   1.0000000] bge0 at pci8 dev 4 function 0: Broadcom BCM5714 Gigabit Ethernet
[   1.0000000] bge0: interrupting at ivec 3795
[   1.0000000] bge0: HW config 00010115, 00000015, 00000000, 00000000 00000000
[   1.0000000] bge0: ASIC BCM5715 A3 (0x9003), Ethernet address [_MAC_XXXXXXXXXX]
[   1.0000000] bge0: WARNING: failed to restrict dma range, falling back to parent bus dma range
[   1.0000000] brgphy0 at bge0 phy 1: BCM5714 1000BASE-T/X media interface, rev. 0
[   1.0000000] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[   1.0000000] bge1 at pci8 dev 4 function 1: Broadcom BCM5714 Gigabit Ethernet
[   1.0000000] bge1: interrupting at ivec 3796
[   1.0000000] bge1: HW config 00000114, 00000014, 00000000, 00000000 00000000
[   1.0000000] bge1: ASIC BCM5715 A3 (0x9003), Ethernet address [_MAC_XXXXXXXXXX]
[   1.0000000] bge1: WARNING: failed to restrict dma range, falling back to parent bus dma range
[   1.0000000] brgphy1 at bge1 phy 1: BCM5714 1000BASE-T/X media interface, rev. 0
[   1.0000000] brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[   1.0000000] ppb8 at pci8 dev 8 function 0: ServerWorks HT1000 PCI/PCI-X Bridge (rev. 0xb4)
[   1.0000000] pci9 at ppb8 bus 11
[   1.0000000] ppb9 at pci1 dev 10 function 0: PLX Technology product 8532 (rev. 0xba)
[   1.0000000] ppb9: PCI Express capability version 1 <Downstream Port of PCI-E Switch> x4 @ 2.5GT/s
[   1.0000000] pci10 at ppb9 bus 12
[   1.0000000] ppb10 at pci10 dev 0 function 0: ServerWorks BCM5714/BCM5715 Integral PCI-E to PCI-X Bridge (rev. 0xb5)
[   1.0000000] ppb10: PCI Express capability version 1 <PCI-E to PCI/PCI-X Bridge>
[   1.0000000] pci11 at ppb10 bus 13
[   1.0000000] bge2 at pci11 dev 4 function 0: Broadcom BCM5714 Gigabit Ethernet
[   1.0000000] bge2: interrupting at ivec 3796
[   1.0000000] bge2: HW config 00010115, 00000015, 00000000, 00000000 00000000
[   1.0000000] bge2: ASIC BCM5715 A3 (0x9003), Ethernet address [_MAC_XXXXXXXXXX]
[   1.0000000] bge2: WARNING: failed to restrict dma range, falling back to parent bus dma range
[   1.0000000] brgphy2 at bge2 phy 1: BCM5714 1000BASE-T/X media interface, rev. 0
[   1.0000000] brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[   1.0000000] bge3 at pci11 dev 4 function 1: Broadcom BCM5714 Gigabit Ethernet
[   1.0000000] bge3: interrupting at ivec 3797
[   1.0000000] bge3: HW config 00000114, 00000014, 00000000, 00000000 00000000
[   1.0000000] bge3: ASIC BCM5715 A3 (0x9003), Ethernet address [_MAC_XXXXXXXXXX]
[   1.0000000] bge3: WARNING: failed to restrict dma range, falling back to parent bus dma range
[   1.0000000] brgphy3 at bge3 phy 1: BCM5714 1000BASE-T/X media interface, rev. 0
[   1.0000000] brgphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[   1.0000000] ppb11 at pci11 dev 8 function 0: ServerWorks HT1000 PCI/PCI-X Bridge (rev. 0xb4)
[   1.0000000] pci12 at ppb11 bus 14
[   1.0000000] mpt2 at pci12 dev 1 function 0: Symbios Logic SAS1064 (rev. 0x02)
[   1.0000000] mpt2: interrupting at ivec 2f8f
[   1.0000000] mpt2: Phy 0: Link Status Unknown
[   1.0000000] mpt2: Phy 0: Link Status Unknown
[   1.0000000] scsibus2 at mpt2: 63 targets, 8 luns per target
[   1.0000000] pyro1 at mainbus0: "Fire", rev 3, ign 7c0, bus B 2 to 4
[   1.0000000] pyro1: pci13 at pyro1
[   1.0000000] ppb12 at pci13 dev 0 function 0: Intel Serial to Parallel PCI Bridge A (rev. 0x09)
[   1.0000000] ppb12: PCI Express capability version 1 <PCI-E to PCI/PCI-X Bridge>
[   1.0000000] pci14 at ppb12 bus 3
[   1.0000000] ppb13 at pci13 dev 0 function 2: Intel Serial to Parallel PCI Bridge B (rev. 0x09)
[   1.0000000] ppb13: PCI Express capability version 1 <PCI-E to PCI/PCI-X Bridge>
[   1.0000000] pci15 at ppb13 bus 4
[   1.0000000] ebus1 at mainbus0
[   1.0000000] flashprom at ebus1 addr 0-1fffff not configured
[   1.0000000] com0 at ebus1 addr 80-87 ipl 7c8: ns16550a, 16-byte FIFO
[   1.0000000] com0: console
[   1.0000000] com1 at ebus1 addr 40-47 ipl 7c9: ns16550a, 16-byte FIFO
[   1.0000000] rmc-comm at ebus1 addr 0-7 ipl 7ca not configured
[   1.0000000] gpio at ebus1 addr c0-c0 not configured
[   1.0000000] env-monitor at ebus1 addr 0-80 not configured
[   1.0000000] power at ebus1 addr 40-c1 ipl 7c3 not configured
[   1.0000000] i2c at mainbus0 not configured
[   1.0000000] pcons at mainbus0 not configured
[   1.0000000] WARNING: system needs entropy for security; see entropy(7)
[   1.0000169] No counter-timer -- using %stick at 20MHz as system clock.
[   1.7483823] scsibus0: waiting 2 seconds for devices to settle...
[   1.7483823] scsibus1: waiting 2 seconds for devices to settle...
[   1.7483823] uhub0 at usb0: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
[   1.7483823] scsibus2: waiting 2 seconds for devices to settle...
[   1.7483823] uhub1 at usb1: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
[   2.1745916] uhub2 at usb2: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
[   2.8745920] ehci0: handing over full speed device on port 3 to ohci0
[   4.0345924] uhub3 at uhub1 port 1: vendor 03eb (0x03eb) Standard USB Hub (0x3301), class 9/0, rev 1.10/3.00, addr 2
[   4.2245917] sd0 at scsibus0 target 0 lun 0: <ZULUSCSI, HARDDRIVE, 2.3W> disk fixed
[   4.3146057] sd0: 8189 MB, 1044 cyl, 255 head, 63 sec, 512 bytes/sect x 16771860 sectors
[   4.4145935] sd0: sync (50.00ns offset 15), 16-bit (40.000MB/s) transfers
[   5.4945916] cd0 at scsibus0 target 3 lun 0: <ZULUSCSI, CDROM, 2.3W> cdrom removable
[   5.5945927] cd0: sync (50.00ns offset 15), 16-bit (40.000MB/s) transfers
[   5.6749515] cd1 at scsibus0 target 4 lun 0: <ZULUSCSI, CDROM, 2.3W> cdrom removable
[   5.7666178] cd1: sync (50.00ns offset 15), 16-bit (40.000MB/s) transfers
[   5.8481811] cd2 at scsibus0 target 5 lun 0: <ZULUSCSI, CDROM, 2.3W> cdrom removable
[   5.9345914] cd2: sync (50.00ns offset 15), 16-bit (40.000MB/s) transfers
[   7.4945917] entropy: best effort
[  18.1145911] sd1 at scsibus2 target 0 lun 0: <SEAGATE, ST973402SSUN72G, 0603> disk fixed
[  18.2545914] sd1(mpt2:0:0:0):  Check Condition on CDB: 0x23 00 00 00 00 00 00 00 0c 00
[  18.3445911]     SENSE KEY:  Illegal Request
[  18.3945908]      ASC/ASCQ:  Invalid Command Operation Code
[  18.4545910]      FRU CODE:  0x1
[  18.4945908]          SKSV:  Error in CDB, Offset 0, bit 7
[  18.5645912] sd1: drive offline
[  18.5945910] sd1: tagged queueing
[  19.1345910] sd2 at scsibus2 target 1 lun 0: <FUJITSU, MAY2073RCSUN72G, 0501> disk fixed
[  19.2745911] sd2: 70007 MB, 14100 cyl, 24 head, 423 sec, 512 bytes/sect x 143374738 sectors
[  19.3745910] sd2: tagged queueing
[  19.4345914] swwdog0: software watchdog initialized
[  19.5345911] sd1(mpt2:0:0:0):  Check Condition on CDB: 0x23 00 00 00 00 00 00 00 0c 00
[  19.6245911]     SENSE KEY:  Illegal Request
[  19.6745908]      ASC/ASCQ:  Invalid Command Operation Code
[  19.7445911]      FRU CODE:  0x1
[  19.7745908]          SKSV:  Error in CDB, Offset 0, bit 7
[  19.8445907] WARNING: 4 errors while detecting hardware; check system log.
[  19.9245910] root on sd0a dumps on sd0b
[  19.9745915] root file system type: ffs
[  20.0145913] kern.module.path=/stand/sparc64/11.0/modules
Sat Sep  6 15:53:25 EDT 2025
Starting root file system check:
/dev/rsd0a: file system is clean; not checking
Setting sysctl variables:
ddb.onpanic: 1 -> 0
swapctl: setting dump device to /dev/sd0b
swapctl: adding /dev/sd0b as swap device at priority 0
Starting file system checks:
[  20.8745976] entropy: ready
Loaded entropy from /var/db/entropy-file.
Waiting for entropy...done
Setting tty flags.
Starting network.
Hostname: v245nb110.localhost
IPv6 mode: host
Configuring network interfaces: bge0.
Adding interface aliases:.
Waiting for duplicate address detection to finish...
Starting dhcpcd.
Building databases: dev, utmp, utmpx.
Starting syslogd.
Setting date via ntp.
Mounting all file systems...
Clearing temporary files.
Checking quotas: done.
Setting securelevel: kern.securelevel: 0 -> 1
swapctl: setting dump device to /dev/sd0b
Starting virecover.
Checking for core dump...
savecore: no core dump
Starting local daemons:.
Updating motd.
Starting ntpd.
Starting sshd.
Starting postfix.
postfix/postlog: starting the Postfix mail system
Starting inetd.
Starting cron.
Sat Sep  6 15:52:19 EDT 2025

NetBSD/sparc64 (v245nb110.localhost) (constty)

login:

v245nb110# dd if=/dev/rsd0c of=/dev/null bs=1m count=300
300+0 records in
300+0 records out
314572800 bytes transferred in 9.880 secs (31839352 bytes/sec)

v245nb110# dd if=/dev/rsd2c of=/dev/null bs=1m count=300
300+0 records in
300+0 records out
314572800 bytes transferred in 5.061 secs (62156253 bytes/sec)