Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2025-09-07 02:51:38
From: tsutsui
Description: NetBSD/i386 10.1 on Shuttle SA76G2 V2
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
2024
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 10.1 (GENERIC) #0: Mon Dec 16 13:08:11 UTC 2024
[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/i386/compile/GENERIC
total memory = 3326 MB
avail memory = 3242 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
mainbus0 (root)
ACPI: RSDP 0x00000000000FABC0 000014 (v00 ACPIAM)
ACPI: RSDT 0x00000000CFEB0000 000044 (v01 Shuttl Shuttle 20101117 MSFT 00000097)
ACPI: FACP 0x00000000CFEB0200 000084 (v01 111710 FACP1052 20101117 MSFT 00000097)
Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20221020/tbfadt-688)
ACPI: DSDT 0x00000000CFEB05D0 00506E (v01 Shuttl SA76GV20 00000001 INTL 20051117)
ACPI: FACS 0x00000000CFEBE000 000040
ACPI: APIC 0x00000000CFEB0390 00007C (v01 111710 APIC1052 20101117 MSFT 00000097)
ACPI: MCFG 0x00000000CFEB0410 00003C (v01 111710 OEMMCFG 20101117 MSFT 00000097)
ACPI: SLIC 0x00000000CFEB0450 000176 (v01 Shuttl Shuttle 20101117 MSFT 00000097)
ACPI: OEMB 0x00000000CFEBE040 000072 (v01 111710 OEMB1052 20101117 MSFT 00000097)
ACPI: SRAT 0x00000000CFEBA5D0 0000C8 (v03 AMD FAM_F_10 00000002 AMD 00000001)
ACPI: HPET 0x00000000CFEBA6A0 000038 (v01 111710 OEMHPET 20101117 MSFT 00000097)
ACPI: SSDT 0x00000000CFEBA6E0 000458 (v01 A M I POWERNOW 00000001 AMD 00000001)
ACPI: 2 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x21, 24 pins
cpu0 at mainbus0 apid 0
cpu0: Use mfence to serialize rdtsc
cpu0: AMD Athlon(tm) II X2 260 Processor, id 0x100f63
cpu0: node 0, package 0, core 0, smt 0
cpu0: searching errata for cpu revision 0x00100f63
cpu1 at mainbus0 apid 1
cpu1: AMD Athlon(tm) II X2 260 Processor, id 0x100f63
cpu1: node 0, package 0, core 1, smt 0
acpi0 at mainbus0: Intel ACPICA 20221020
acpi0: X/RSDT: OemId <Shuttl,Shuttle ,20101117>, AslId <MSFT,00000097>
acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
acpi0: SCI interrupting at int 9
acpi0: fixed power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
COPR (PNP0C04) at acpi0 not configured
UAR1 (PNP0501) at acpi0 not configured
UAR2 (PNP0501) at acpi0 not configured
RMEM (PNP0C01) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: AMD RS780 Host Bridge (rev. 0x00)
ppb0 at pci0 dev 1 function 0: vendor 1297 product 9602 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
radeon0 at pci1 dev 5 function 0: ATI Technologies Radeon 3000 IGP (rev. 0x00)
radeon0: autoconfiguration error: unable to reserve VGA registers for i386 radeondrmkms hack
ppb1 at pci0 dev 10 function 0: AMD RS780/RS880 PCI-PCIE Bridge (port 5) (rev. 0x00)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb1: link is x1 @ 2.5GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
mskc0 at pci2 dev 0 function 0, Yukon-2 Ultra 2 (0x0)
mskc0: interrupting at ioapic0 pin 18
msk0 at mskc0 port A: Ethernet address [_MAC_XXXXXXXXXX]
makphy0 at msk0 phy 0: Marvell 88E1149 Gigabit PHY, rev. 1
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ahcisata0 at pci0 dev 17 function 0: ATI Technologies SB700-SB900 SATA Controller (AHCI mode) (rev. 0x00)
ahcisata0: ignoring broken port multiplier support
ahcisata0: ignoring broken NCQ support
ahcisata0: AHCI revision 1.10, 4 ports, 32 slots, CAP 0xb720ff83<CCCS,PSC,SSC,PMD,ISS=0x2=Gen2,SCLO,SAL,SALP,SMPS,SSNTF,S64A>
ahcisata0: interrupting at ioapic0 pin 22
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 2
atabus3 at ahcisata0 channel 3
ohci0 at pci0 dev 18 function 0: ATI Technologies SB700-SB900 USB OHCI Controller (rev. 0x00)
ohci0: interrupting at ioapic0 pin 16
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ohci1 at pci0 dev 18 function 1: ATI Technologies SB700-SB900 USB OHCI Controller (rev. 0x00)
ohci1: interrupting at ioapic0 pin 16
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
ehci0 at pci0 dev 18 function 2: ATI Technologies SB700-SB900 USB EHCI Controller (rev. 0x00)
ehci0: 32-bit DMA
ehci0: interrupting at ioapic0 pin 17
ehci0: dropped intr workaround enabled
ehci0: EHCI version 1.0
ehci0: 2 companion controllers, 3 ports each: ohci0 ohci1
ehci0: Using DMA subregion for control data structures
usb2 at ehci0: USB revision 2.0
ohci2 at pci0 dev 19 function 0: ATI Technologies SB700-SB900 USB OHCI Controller (rev. 0x00)
ohci2: interrupting at ioapic0 pin 18
ohci2: OHCI version 1.0, legacy support
usb3 at ohci2: USB revision 1.0
ohci3 at pci0 dev 19 function 1: ATI Technologies SB700-SB900 USB OHCI Controller (rev. 0x00)
ohci3: interrupting at ioapic0 pin 18
ohci3: OHCI version 1.0, legacy support
usb4 at ohci3: USB revision 1.0
ehci1 at pci0 dev 19 function 2: ATI Technologies SB700-SB900 USB EHCI Controller (rev. 0x00)
ehci1: 32-bit DMA
ehci1: interrupting at ioapic0 pin 19
ehci1: dropped intr workaround enabled
ehci1: EHCI version 1.0
ehci1: 2 companion controllers, 3 ports each: ohci2 ohci3
ehci1: Using DMA subregion for control data structures
usb5 at ehci1: USB revision 2.0
piixpm0 at pci0 dev 20 function 0: ATI Technologies SBx00 SMBus Controller (rev. 0x3c)
piixpm0: interrupting at SMI,
iic0 at piixpm0 port 0: I2C bus
ixpide0 at pci0 dev 20 function 1: ATI Technologies IXP IDE Controller (rev. 0x00)
ixpide0: bus-master DMA support present
ixpide0: primary channel configured to compatibility mode
ixpide0: primary channel interrupting at ioapic0 pin 14
atabus4 at ixpide0 channel 0
ixpide0: secondary channel configured to compatibility mode
ixpide0: secondary channel interrupting at ioapic0 pin 15
atabus5 at ixpide0 channel 1
hdaudio0 at pci0 dev 20 function 2: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 16
hdaudio0: HDA ver. 1.0, OSS 4, ISS 4, BSS 0, SDO 1, 64-bit
hdafg0 at hdaudio0: Realtek ALC662
hdafg0: DAC00 2ch: Speaker [Jack], HP Out [Jack]
hdafg0: DIG01 2ch: SPDIF Out [Jack]
hdafg0: ADC02 2ch: Line In [Jack], Mic In [Jack]
hdafg0: 2ch/2ch 44100Hz 48000Hz 96000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: playback, capture, full duplex, independent
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
pcib0 at pci0 dev 20 function 3: ATI Technologies SB700-SB900 LPC Host Controller (rev. 0x00)
ppb2 at pci0 dev 20 function 4: ATI Technologies SBx00 PCI to PCI Bridge (rev. 0x00)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled
National Instruments product c801 (miscellaneous communications, revision 0x02) at pci3 dev 10 function 0 not configured
ohci4 at pci0 dev 20 function 5: ATI Technologies SB700-SB900 USB OHCI Controller (rev. 0x00)
ohci4: interrupting at ioapic0 pin 18
ohci4: OHCI version 1.0, legacy support
usb6 at ohci4: USB revision 1.0
pchb1 at pci0 dev 24 function 0: AMD AMD64 Family10h HyperTransport Configuration (rev. 0x00)
pchb2 at pci0 dev 24 function 1: AMD AMD64 Family10h Address Map Configuration (rev. 0x00)
pchb3 at pci0 dev 24 function 2: AMD AMD64 Family10h DRAM Configuration (rev. 0x00)
amdnb_misc0 at pci0 dev 24 function 3: AMD NB Misc Configuration
amdtemp0 at amdnb_misc0: AMD CPU Temperature Sensors (Family10h)
pchb4 at pci0 dev 24 function 4: AMD AMD64 Family10h Link Configuration (rev. 0x00)
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, 16-byte FIFO
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, 16-byte FIFO
pckbc0 at isa0 port 0x60-0x64
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat 0 us, pow 0 mW
acpicpu0: P0: FFH, lat 4 us, pow 31360 mW, 3200 MHz
acpicpu0: P1: FFH, lat 4 us, pow 22230 mW, 2500 MHz
acpicpu0: P2: FFH, lat 4 us, pow 18480 mW, 1900 MHz
acpicpu0: P3: FFH, lat 4 us, pow 7175 mW, 800 MHz
acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 %
acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 %
acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 %
acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 %
acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 %
acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 %
acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 %
acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 %
acpicpu1 at cpu1: ACPI CPU
ohci1: 1 scheduling overruns
WARNING: system needs entropy for security; see entropy(7)
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 3199998000 Hz quality 3000
IPsec: Initialized Security Association Processing.
uhub0 at usb0: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
uhub1 at usb1: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
uhub2 at usb2: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
uhub2: 6 ports with 6 removable, self powered
uhub3 at usb3: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub3: 3 ports with 3 removable, self powered
uhub4 at usb4: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub4: 3 ports with 3 removable, self powered
uhub5 at usb5: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
uhub5: 6 ports with 6 removable, self powered
uhub6 at usb6: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub6: 2 ports with 2 removable, self powered
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 3.0Gb/s
ahcisata0 port 2: device present, speed: 1.5Gb/s
wd0 at atabus0 drive 0
wd0: <INTEL SSDSC2CT240A4>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 223 GB, 465141 cyl, 16 head, 63 sec, 512 bytes/sect x 468862128 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), WRITE DMA FUA EXT
wd1 at atabus1 drive 0
wd1: <GBDriver RS2>
wd1: drive supports 1-sector PIO transfers, LBA48 addressing
wd1: 15360 MB, 31207 cyl, 16 head, 63 sec, 512 bytes/sect x 31457280 sectors
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA
wd1(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), WRITE DMA FUA EXT
atapibus0 at atabus2: 1 targets
cd0 at atapibus0 drive 0: <TSSTcorp CDDVDW SH-S243D, R4116GCBB04269, SB00> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(ahcisata0:2:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
swwdog0: software watchdog initialized
WARNING: 1 error while detecting hardware; check system log.
boot device: wd1
root on wd1a dumps on wd1b
root file system type: ffs
kern.module.path=/stand/i386/10.1/modules
[drm] initializing kernel modesetting (RS780 0x1002:0x9616 0x1297:0x3171 0x00).
[drm] register mmio base: 0xfe9f0000
[drm] register mmio size: 65536
WARNING: clock gained 23 days
ATOM BIOS: 113
radeon0: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used)
radeon0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[drm] Detected VRAM RAM=100M, BAR=256M
[drm] RAM width 32bits DDR
Zone kernel: Available graphics memory: 1412156 KiB
[drm] radeon: 256M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] Loading RS780 Microcode
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
radeon0: WB enabled
radeon0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0x0xde448c00
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon0: radeon: MSI limited to 32-bit
radeon0: interrupting at ioapic0 pin 18 (radeon0)
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 1 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA-1
[drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Connector 1:
[drm] DVI-D-1
[drm] HPD3
[drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[drm] Encoders:
[drm] DFP1: INTERNAL_KLDSCP_LVTMA
radeondrmkmsfb0 at radeon0
[drm] Initialized radeon 2.50.0 20080528 for radeon0 on minor 0
radeondrmkmsfb0: framebuffer at 0xd0141000, size 1920x1080, depth 32, stride 7680
wsdisplay0 at radeondrmkmsfb0 kbdmux 1: console (default, vt100 emulation)
wsmux1: connecting to wsdisplay0
uhidev0 at uhub4 port 3 configuration 1 interface 0
uhidev0: SONiX (0x2efd) USB Keyboard (0x1912), rev 1.10/4.81, addr 2, iclass 3/1
ukbd0 at uhidev0
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub4 port 3 configuration 1 interface 1
uhidev1: SONiX (0x2efd) USB Keyboard (0x1912), rev 1.10/4.81, addr 2, iclass 3/0
uhidev1: 6 report ids
uhid0 at uhidev1 reportid 1: input=4, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
ukbd1 at uhidev1 reportid 6
wskbd1 at ukbd1 mux 1
wskbd1: connecting to wsdisplay0
entropy: best effort
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)