Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2025-09-13 19:12:18
From: jramstedt
Description: NetBSD/alpha 11.0_BETA on Digital AlphaPC 164LX
consinit: not using prom console
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
2024, 2025
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 11.0_BETA (GENERIC) #0: Mon Sep 8 12:35:01 UTC 2025
[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/alpha/compile/GENERIC
Digital AlphaPC 164LX 599 MHz
8192 byte page size, 1 processor.
total memory = 1024 MB
(2136 KB reserved for PROM, 1021 MB used by NetBSD)
avail memory = 993 MB
timecounter: Timecounters tick every 0.976 msec
Kernelized RAIDframe activated
mainbus0 (root)
cpu0 at mainbus0: ID 0 (primary), 21164A-2 (EV56)
cpu0: Architecture extensions: 0x1<BWX>
cia0 at mainbus0: DECchip 2117x Core Logic Chipset (Pyxis), pass 2
cia0: extended capabilities: 0x1<BWEN>
cia0: using BWX for PCI config access
pci0 at cia0 bus 0
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
fxp0 at pci0 dev 6 function 0: i82558 Ethernet (rev. 0x05)
fxp0: interrupting at eb164 irq 0
fxp0: May need receiver lock-up workaround
fxp0: Ethernet address [_MAC_XXXXXXXXXX]
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ahc0 at pci0 dev 7 function 0: Adaptec 3960D Ultra160 SCSI adapter
ahc0: interrupting at eb164 irq 1
ahc0: aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
scsibus0 at ahc0: 16 targets, 8 luns per target
ahc1 at pci0 dev 7 function 1: Adaptec 3960D Ultra160 SCSI adapter
ahc1: interrupting at eb164 irq 8
ahc1: aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
scsibus1 at ahc1: 16 targets, 8 luns per target
sio0 at pci0 dev 8 function 0: Intel 82378ZB System I/O (rev. 0x43)
pm3fb0 at pci0 dev 9 function 0: 3D Labs GLINT Permedia 3 (rev. 0x01)
autoconfiguration error: pm3fb0: no width property
autoconfiguration error: pm3fb0: no height property
autoconfiguration error: pm3fb0: no depth property
pm3fb0: 16 MB aperture at 0x88000000
pm3fb0: pm3 using 1280 x 1024 in 8 bit, stride 1280
wsdisplay1 at pm3fb0 kbdmux 1
wsmux1: connecting to wsdisplay1
cmdide0 at pci0 dev 11 function 0: CMD Technology PCI0646 (rev. 0x01)
cmdide0: bus-master DMA support present
cmdide0: primary channel wired to compatibility mode, channel non-independent
cmdide0: primary channel interrupting at isa irq 14
atabus0 at cmdide0 channel 0
cmdide0: secondary channel wired to compatibility mode, channel non-independent
cmdide0: secondary channel interrupting at isa irq 15
atabus1 at cmdide0 channel 1
isa0 at sio0
lpt0 at isa0 port 0x3bc-0x3bf irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, 16-byte FIFO
com0: console
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, 16-byte FIFO
pckbc0 at isa0 port 0x60-0x64
attimer0 at isa0 port 0x40-0x43
pcppi0 at isa0 port 0x61
spkr0 at pcppi0: PC Speaker
wsbell at spkr0 not configured
midi0 at pcppi0: PC speaker
isabeep0 at pcppi0
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
mcclock0 at isa0 port 0x70-0x71: mc146818 compatible time-of-day clock
attimer0: attached to pcppi0
WARNING: system needs entropy for security; see entropy(7)
timecounter: Timecounter "PCC" frequency 599871744 Hz quality 1000
timecounter: Timecounter "clockinterrupt" frequency 1024 Hz quality 0
scsibus0: waiting 2 seconds for devices to settle...
scsibus1: waiting 2 seconds for devices to settle...
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
sd0 at scsibus0 target 3 lun 0: <COMPAQ, BB00911CA0, 3B05> disk fixed
sd0: 8678 MB, 5273 cyl, 20 head, 168 sec, 512 bytes/sect x 17773524 sectors
sd0: sync (25.00ns offset 15), 16-bit (80.000MB/s) transfers, tagged queueing
swwdog0: software watchdog initialized
WARNING: 3 errors while detecting hardware; check system log.
root on sd0a dumps on sd0b
root file system type: ffs
kern.module.path=/stand/alpha/11.0/modules
entropy: best effort
entropy: ready