Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2025-09-24 11:52:01
From: Ken Wellsch
Description: NetBSD/sparc64 10.1 STABLE on Sun Fire V445
Rebooting with command: boot
Boot device: disk File and args:
NetBSD IEEE 1275 Multi-FS Bootblock
Version $NetBSD: bootblk.fth,v 1.17 2022/11/17 06:40:39 chs Exp $
>> NetBSD/sparc64 OpenFirmware Boot, Revision 1.20 (Mon Jun 2 06:03:19 UTC 2025)
=0xbefa88
Loading netbsd: 12515912+834352+24 [699336+473362]=0xeeaad8
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
[ 1.0000000] 2024, 2025
[ 1.0000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights reserved.
[ 1.0000000] NetBSD 10.1_STABLE (GENERIC) #0: Mon Jun 2 06:03:19 UTC 2025
[ 1.0000000] [_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/sparc64/compile/GENERIC
[ 1.0000000] total memory = 16384 MB
[ 1.0000000] avail memory = 16074 MB
[ 1.0000000] mainbus0 (root): SUNW,Sun-Fire-V445 (Sun Fire V445): [_HOSTID_XXXXX]
[ 1.0000000] cpu0 at mainbus0: SUNW,UltraSPARC-IIIi @ 1593 MHz, CPU id 0
[ 1.0000000] cpu0: manuf 3e, impl 16, mask 34
[ 1.0000000] cpu0: system tick frequency 10 MHz
[ 1.0000000] cpu0: 32K instruction (32 b/l), 64K data (32 b/l), 1024K external (64 b/l)
[ 1.0000000] cpu1 at mainbus0: SUNW,UltraSPARC-IIIi @ 1593 MHz, CPU id 1
[ 1.0000000] cpu1: manuf 3e, impl 16, mask 34
[ 1.0000000] cpu1: system tick frequency 10 MHz
[ 1.0000000] cpu1: 32K instruction (32 b/l), 64K data (32 b/l), 1024K external (64 b/l)
[ 1.0000000] cpu2 at mainbus0: SUNW,UltraSPARC-IIIi @ 1593 MHz, CPU id 2
[ 1.0000000] cpu2: manuf 3e, impl 16, mask 34
[ 1.0000000] cpu2: system tick frequency 10 MHz
[ 1.0000000] cpu2: 32K instruction (32 b/l), 64K data (32 b/l), 1024K external (64 b/l)
[ 1.0000000] cpu3 at mainbus0: SUNW,UltraSPARC-IIIi @ 1593 MHz, CPU id 3
[ 1.0000000] cpu3: manuf 3e, impl 16, mask 34
[ 1.0000000] cpu3: system tick frequency 10 MHz
[ 1.0000000] cpu3: 32K instruction (32 b/l), 64K data (32 b/l), 1024K external (64 b/l)
[ 1.0000000] memory-controller at mainbus0 not configured
[ 1.0000000] memory-controller at mainbus0 not configured
[ 1.0000000] memory-controller at mainbus0 not configured
[ 1.0000000] memory-controller at mainbus0 not configured
[ 1.0000000] pyro0 at mainbus0: "Fire", rev 3, ign 780, bus A 2 to 9
[ 1.0000000] pyro0: pci0 at pyro0
[ 1.0000000] ppb0 at pci0 dev 0 function 0: PLX Technology product 8532 (rev. 0xba)
[ 1.0000000] ppb0: PCI Express capability version 1 <Upstream Port of PCI-E Switch>
[ 1.0000000] pci1 at ppb0 bus 3
[ 1.0000000] ppb1 at pci1 dev 1 function 0: PLX Technology product 8532 (rev. 0x03)
[ 1.0000000] ppb1: PCI Express capability version 1 <Downstream Port of PCI-E Switch> x4 @ 2.5GT/s
[ 1.0000000] pci2 at ppb1 bus 4
[ 1.0000000] ppb2 at pci2 dev 0 function 0: ServerWorks BCM5714/BCM5715 Integral PCI-E to PCI-X Bridge (rev. 0xb5)
[ 1.0000000] ppb2: PCI Express capability version 1 <PCI-E to PCI/PCI-X Bridge>
[ 1.0000000] pci3 at ppb2 bus 5
[ 1.0000000] bge0 at pci3 dev 4 function 0: Broadcom BCM5714 Gigabit Ethernet
[ 1.0000000] bge0: interrupting at ivec 3795
[ 1.0000000] bge0: HW config 00000015, 00000015, 00000000, 00000000 00000000
[ 1.0000000] bge0: ASIC BCM5715 A3 (0x9003), Ethernet address [_MAC_XXXXXXXXXX]
[ 1.0000000] bge0: WARNING: failed to restrict dma range, falling back to parent bus dma range
[ 1.0000000] brgphy0 at bge0 phy 1: BCM5714 1000BASE-T/X media interface, rev. 0
[ 1.0000000] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[ 1.0000000] bge1 at pci3 dev 4 function 1: Broadcom BCM5714 Gigabit Ethernet
[ 1.0000000] bge1: interrupting at ivec 3796
[ 1.0000000] bge1: HW config 00000014, 00000014, 00000000, 00000000 00000000
[ 1.0000000] bge1: ASIC BCM5715 A3 (0x9003), Ethernet address [_MAC_XXXXXXXXXX]
[ 1.0000000] bge1: WARNING: failed to restrict dma range, falling back to parent bus dma range
[ 1.0000000] brgphy1 at bge1 phy 1: BCM5714 1000BASE-T/X media interface, rev. 0
[ 1.0000000] brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[ 1.0000000] ppb3 at pci3 dev 8 function 0: ServerWorks HT1000 PCI/PCI-X Bridge (rev. 0xb4)
[ 1.0000000] pci4 at ppb3 bus 6
[ 1.0000000] ppb4 at pci1 dev 2 function 0: PLX Technology product 8532 (rev. 0x0a)
[ 1.0000000] ppb4: PCI Express capability version 1 <Downstream Port of PCI-E Switch> x4 @ 2.5GT/s
[ 1.0000000] pci5 at ppb4 bus 7
[ 1.0000000] mpt0 at pci5 dev 0 function 0: Symbios Logic SAS1068E (rev. 0x02)
[ 1.0000000] mpt0: interrupting at ivec 2f96
[ 1.0000000] mpt0: Phy 0: Link Status Unknown
[ 1.0000000] scsibus0 at mpt0: 112 targets, 8 luns per target
[ 1.0000000] ppb5 at pci1 dev 8 function 0: PLX Technology product 8532 (rev. 0xba)
[ 1.0000000] ppb5: PCI Express capability version 1 <Downstream Port of PCI-E Switch> x8 @ 2.5GT/s
[ 1.0000000] pci6 at ppb5 bus 8
[ 1.0000000] ppb6 at pci1 dev 9 function 0: PLX Technology product 8532 (rev. 0xba)
[ 1.0000000] ppb6: PCI Express capability version 1 <Downstream Port of PCI-E Switch> x8 @ 2.5GT/s
[ 1.0000000] pci7 at ppb6 bus 9
[ 1.0000000] pyro1 at mainbus0: "Fire", rev 3, ign 7c0, bus B 2 to 10
[ 1.0000000] pyro1: pci8 at pyro1
[ 1.0000000] ppb7 at pci8 dev 0 function 0: PLX Technology product 8532 (rev. 0xba)
[ 1.0000000] ppb7: PCI Express capability version 1 <Upstream Port of PCI-E Switch>
[ 1.0000000] pci9 at ppb7 bus 3
[ 1.0000000] ppb8 at pci9 dev 1 function 0: PLX Technology product 8532 (rev. 0x03)
[ 1.0000000] ppb8: PCI Express capability version 1 <Downstream Port of PCI-E Switch> x4 @ 2.5GT/s
[ 1.0000000] pci10 at ppb8 bus 4
[ 1.0000000] ppb9 at pci10 dev 0 function 0: Acer Labs M5249 Hypertransport to PCI Bridge (rev. 0x00)
[ 1.0000000] ppb9: PCI Express capability version 1 <PCI-E to PCI/PCI-X Bridge>
[ 1.0000000] pci11 at ppb9 bus 5
[ 1.0000000] ohci0 at pci11 dev 28 function 0: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03)
[ 1.0000000] ohci0: interrupting at ivec 7ca
[ 1.0000000] ohci0: OHCI version 1.0, legacy support
[ 1.0000000] usb0 at ohci0: USB revision 1.0
[ 1.0000000] ohci1 at pci11 dev 28 function 1: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03)
[ 1.0000000] ohci1: interrupting at ivec 7ca
[ 1.0000000] ohci1: OHCI version 1.0, legacy support
[ 1.0000000] usb1 at ohci1: USB revision 1.0
[ 1.0000000] ohci2 at pci11 dev 28 function 2: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03)
[ 1.0000000] ohci2: interrupting at ivec 7ca
[ 1.0000000] ohci2: OHCI version 1.0, legacy support
[ 1.0000000] usb2 at ohci2: USB revision 1.0
[ 1.0000000] ehci0 at pci11 dev 28 function 3: Acer Labs M5239 USB 2.0 Host Controller (rev. 0x01)
[ 1.0000000] ehci0: interrupting at ivec 7c9
[ 1.0000000] ehci0: 3 companion controllers, 3 ports each: ohci0 ohci1 ohci2
[ 1.0000000] usb3 at ehci0: USB revision 2.0
[ 1.0000000] ebus0 at pci11 dev 30 function 0: Acer Labs product 1575, revision 0x00
[ 1.0000000] rtc0 at ebus0 addr 70-73: mc146818 compatible time-of-day clock: m5823
[ 1.0000000] aceride0 at pci11 dev 31 function 0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc8)
[ 1.0000000] aceride0: using ivec 2fc8 for native-PCI interrupt
[ 1.0000000] atabus0 at aceride0 channel 0
[ 1.0000000] atabus1 at aceride0 channel 1
[ 1.0000000] ppb10 at pci9 dev 2 function 0: PLX Technology product 8532 (rev. 0x0b)
[ 1.0000000] ppb10: PCI Express capability version 1 <Downstream Port of PCI-E Switch> x4 @ 2.5GT/s
[ 1.0000000] pci12 at ppb10 bus 6
[ 1.0000000] ppb11 at pci12 dev 0 function 0: ServerWorks BCM5714/BCM5715 Integral PCI-E to PCI-X Bridge (rev. 0xb5)
[ 1.0000000] ppb11: PCI Express capability version 1 <PCI-E to PCI/PCI-X Bridge>
[ 1.0000000] pci13 at ppb11 bus 7
[ 1.0000000] bge2 at pci13 dev 4 function 0: Broadcom BCM5714 Gigabit Ethernet
[ 1.0000000] bge2: interrupting at ivec 37d6
[ 1.0000000] bge2: HW config 00000015, 00000015, 00000000, 00000000 00000000
[ 1.0000000] bge2: ASIC BCM5715 A3 (0x9003), Ethernet address [_MAC_XXXXXXXXXX]
[ 1.0000000] bge2: WARNING: failed to restrict dma range, falling back to parent bus dma range
[ 1.0000000] brgphy2 at bge2 phy 1: BCM5714 1000BASE-T/X media interface, rev. 0
[ 1.0000000] brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[ 1.0000000] bge3 at pci13 dev 4 function 1: Broadcom BCM5714 Gigabit Ethernet
[ 1.0000000] bge3: interrupting at ivec 37d7
[ 1.0000000] bge3: HW config 00000014, 00000014, 00000000, 00000000 00000000
[ 1.0000000] bge3: ASIC BCM5715 A3 (0x9003), Ethernet address [_MAC_XXXXXXXXXX]
[ 1.0000000] bge3: WARNING: failed to restrict dma range, falling back to parent bus dma range
[ 1.0000000] brgphy3 at bge3 phy 1: BCM5714 1000BASE-T/X media interface, rev. 0
[ 1.0000000] brgphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[ 1.0000000] ppb12 at pci13 dev 8 function 0: ServerWorks HT1000 PCI/PCI-X Bridge (rev. 0xb4)
[ 1.0000000] pci14 at ppb12 bus 8
[ 1.0000000] ppb13 at pci9 dev 8 function 0: PLX Technology product 8532 (rev. 0xba)
[ 1.0000000] ppb13: PCI Express capability version 1 <Downstream Port of PCI-E Switch> x8 @ 2.5GT/s
[ 1.0000000] pci15 at ppb13 bus 9
[ 1.0000000] ppb14 at pci9 dev 9 function 0: PLX Technology product 8532 (rev. 0xba)
[ 1.0000000] ppb14: PCI Express capability version 1 <Downstream Port of PCI-E Switch> x8 @ 2.5GT/s
[ 1.0000000] pci16 at ppb14 bus 10
[ 1.0000000] ebus1 at mainbus0
[ 1.0000000] flashprom at ebus1 addr 0-1fffff not configured
[ 1.0000000] gpio at ebus1 addr c00008-c00008 not configured
[ 1.0000000] power at ebus1 addr c0a100-c0a12f ipl 786 not configured
[ 1.0000000] rmc-comm at ebus1 addr c28000-c28007 ipl 789 not configured
[ 1.0000000] com0 at ebus1 addr c2c000-c2c007 ipl 787: ns16550a, 16-byte FIFO
[ 1.0000000] com0: console
[ 1.0000000] com1 at ebus1 addr fffff8-ffffff ipl 78a: ns16550a, 16-byte FIFO
[ 1.0000000] i2c at mainbus0 not configured
[ 1.0000000] pcons at mainbus0 not configured
[ 1.0000000] WARNING: system needs entropy for security; see entropy(7)
[ 1.0000144] No counter-timer -- using %stick at 10MHz as system clock.
[ 2.4967440] scsibus0: waiting 2 seconds for devices to settle...
[ 2.4967440] uhub0 at usb2: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
[ 2.4967440] uhub1 at usb0: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
[ 2.4967440] uhub2 at usb3: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
[ 2.4967440] uhub3 at usb1: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
[ 3.3032064] atapibus0 at atabus0: 2 targets
[ 3.3632084] cd0 at atapibus0 drive 0: <MATSHITADVD-RAM UJ-85JS, , F8W2> cdrom removable
[ 4.2732066] uhub4 at uhub2 port 7: vendor 04b4 (0x04b4) product 6560 (0x6560), class 9/0, rev 2.00/0.0b, addr 2
[ 4.3930582] uhub4: multiple transaction translators
[ 5.3332065] sd0 at scsibus0 target 0 lun 0: <HITACHI, H101473SCSUN72G, SA25> disk fixed
[ 5.4332072] sd0: 70007 MB, 14089 cyl, 24 head, 424 sec, 512 bytes/sect x 143374738 sectors
[ 5.5332074] sd0: tagged queueing
[ 5.5832122] swwdog0: software watchdog initialized
[ 5.6432066] WARNING: 4 errors while detecting hardware; check system log.
[ 5.7232065] root on sd0a dumps on sd0b
[ 5.7732071] root file system type: ffs
[ 5.8132066] kern.module.path=/stand/sparc64/10.1/modules
Wed Sep 24 07:27:50 EDT 2025
[ 6.9799369] entropy: best effort
Starting root file system check:
/dev/rsd0a: file system is clean; not checking
Setting sysctl variables:
ddb.onpanic: 1 -> 0
swapctl: setting dump device to /dev/sd0b
swapctl: adding /dev/sd0b as swap device at priority 0
Starting file system checks:
[ 7.7899370] entropy: ready
Loaded entropy from /var/db/entropy-file.
Waiting for entropy...done
Setting tty flags.
Starting network.
Hostname: v445.localhost
IPv6 mode: host
Configuring network interfaces: bge0.
Adding interface aliases:.
Waiting for duplicate address detection to finish...
Starting dhcpcd.
Building databases: dev, utmp, utmpx.
Starting syslogd.
Setting date via ntp.
Mounting all file systems...
Clearing temporary files.
Checking quotas: done.
Setting securelevel: kern.securelevel: 0 -> 1
swapctl: setting dump device to /dev/sd0b
Starting virecover.
Checking for core dump...
savecore: no core dump
Starting local daemons:.
Updating motd.
Starting ntpd.
Starting sshd.
Starting postfix.
postfix/postlog: starting the Postfix mail system
Starting inetd.
Starting cron.
Wed Sep 24 07:46:10 EDT 2025
NetBSD/sparc64 (v445.localhost) (constty)
login: root
Password:
Sep 24 07:46:19 v445 login: ROOT LOGIN (root) on tty constty
Last login: Wed Sep 24 07:42:17 2025 on constty
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
2024, 2025
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 10.1_STABLE (GENERIC) #0: Mon Jun 2 06:03:19 UTC 2025
Welcome to NetBSD!
We recommend that you create a non-root account and use su(1) for root access.
v445#