Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2025-09-25 14:02:11
From: Ken Wellsch
Description: NetBSD/sparc64 11.0_BETA on Sun Fire V445
Sun Fire V445, No Keyboard
Copyright 2007 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.25.9, 16384 MB memory installed, Serial #xxxxxxx.
Ethernet address x:x:x:x:x:x:x, Host ID: xxxxxxx.
Rebooting with command: boot disk
Boot device: /pci@1e,600000/pci@0/pci@2/scsi@0/disk@0,0 File and args:
NetBSD IEEE 1275 Multi-FS Bootblock
Version $NetBSD: bootblk.fth,v 1.18 2025/02/28 09:07:12 andvar Exp $
>> NetBSD/sparc64 OpenFirmware Boot, Revision 1.20 (Wed Sep 24 12:39:13 UTC 2025)
=0xcc80c0
Loading netbsd: 13402240+514208+326136 [758496+497257]=0xf00560
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
[ 1.0000000] 2024, 2025
[ 1.0000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights reserved.
[ 1.0000000] NetBSD 11.0_BETA (GENERIC) #0: Wed Sep 24 12:39:13 UTC 2025
[ 1.0000000] [_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/sparc64/compile/GENERIC
[ 1.0000000] total memory = 16384 MB
[ 1.0000000] avail memory = 16074 MB
[ 1.0000000] mainbus0 (root): SUNW,Sun-Fire-V445 (Sun Fire V445): [_HOSTID_XXXXX]
[ 1.0000000] cpu0 at mainbus0: SUNW,UltraSPARC-IIIi @ 1593 MHz, CPU id 0
[ 1.0000000] cpu0: manuf 3e, impl 16, mask 34
[ 1.0000000] cpu0: system tick frequency 10 MHz
[ 1.0000000] cpu0: 32K instruction (32 b/l), 64K data (32 b/l), 1024K external (64 b/l)
[ 1.0000000] cpu1 at mainbus0: SUNW,UltraSPARC-IIIi @ 1593 MHz, CPU id 1
[ 1.0000000] cpu1: manuf 3e, impl 16, mask 34
[ 1.0000000] cpu1: system tick frequency 10 MHz
[ 1.0000000] cpu1: 32K instruction (32 b/l), 64K data (32 b/l), 1024K external (64 b/l)
[ 1.0000000] cpu2 at mainbus0: SUNW,UltraSPARC-IIIi @ 1593 MHz, CPU id 2
[ 1.0000000] cpu2: manuf 3e, impl 16, mask 34
[ 1.0000000] cpu2: system tick frequency 10 MHz
[ 1.0000000] cpu2: 32K instruction (32 b/l), 64K data (32 b/l), 1024K external (64 b/l)
[ 1.0000000] cpu3 at mainbus0: SUNW,UltraSPARC-IIIi @ 1593 MHz, CPU id 3
[ 1.0000000] cpu3: manuf 3e, impl 16, mask 34
[ 1.0000000] cpu3: system tick frequency 10 MHz
[ 1.0000000] cpu3: 32K instruction (32 b/l), 64K data (32 b/l), 1024K external (64 b/l)
[ 1.0000000] memory-controller at mainbus0 not configured
[ 1.0000000] memory-controller at mainbus0 not configured
[ 1.0000000] memory-controller at mainbus0 not configured
[ 1.0000000] memory-controller at mainbus0 not configured
[ 1.0000000] pyro0 at mainbus0: "Fire", rev 3, ign 780, bus A 2 to 10
[ 1.0000000] pyro0: pci0 at pyro0
[ 1.0000000] ppb0 at pci0 dev 0 function 0: PLX Technology product 8532 (rev. 0xba)
[ 1.0000000] ppb0: PCI Express capability version 1 <Upstream Port of PCI-E Switch>
[ 1.0000000] pci1 at ppb0 bus 3
[ 1.0000000] ppb1 at pci1 dev 1 function 0: PLX Technology product 8532 (rev. 0x03)
[ 1.0000000] ppb1: PCI Express capability version 1 <Downstream Port of PCI-E Switch> x4 @ 2.5GT/s
[ 1.0000000] pci2 at ppb1 bus 4
[ 1.0000000] ppb2 at pci2 dev 0 function 0: ServerWorks BCM5714/BCM5715 Integral PCI-E to PCI-X Bridge (rev. 0xb5)
[ 1.0000000] ppb2: PCI Express capability version 1 <PCI-E to PCI/PCI-X Bridge>
[ 1.0000000] pci3 at ppb2 bus 5
[ 1.0000000] bge0 at pci3 dev 4 function 0: Broadcom BCM5714 Gigabit Ethernet
[ 1.0000000] bge0: interrupting at ivec 3795
[ 1.0000000] bge0: HW config 00000015, 00000015, 00000000, 00000000 00000000
[ 1.0000000] bge0: ASIC BCM5715 A3 (0x9003), Ethernet address [_MAC_XXXXXXXXXX]
[ 1.0000000] bge0: WARNING: failed to restrict dma range, falling back to parent bus dma range
[ 1.0000000] brgphy0 at bge0 phy 1: BCM5714 1000BASE-T/X media interface, rev. 0
[ 1.0000000] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[ 1.0000000] bge1 at pci3 dev 4 function 1: Broadcom BCM5714 Gigabit Ethernet
[ 1.0000000] bge1: interrupting at ivec 3796
[ 1.0000000] bge1: HW config 00000014, 00000014, 00000000, 00000000 00000000
[ 1.0000000] bge1: ASIC BCM5715 A3 (0x9003), Ethernet address [_MAC_XXXXXXXXXX]
[ 1.0000000] bge1: WARNING: failed to restrict dma range, falling back to parent bus dma range
[ 1.0000000] brgphy1 at bge1 phy 1: BCM5714 1000BASE-T/X media interface, rev. 0
[ 1.0000000] brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[ 1.0000000] ppb3 at pci3 dev 8 function 0: ServerWorks HT1000 PCI/PCI-X Bridge (rev. 0xb4)
[ 1.0000000] pci4 at ppb3 bus 6
[ 1.0000000] ppb4 at pci4 dev 1 function 0: Intel S21152BA,S21154AE/BE PCI-PCI Bridge (rev. 0x00)
[ 1.0000000] pci5 at ppb4 bus 7
[ 1.0000000] cas0 at pci5 dev 0 function 0: National Semiconductor Saturn (rev. 0x30)
[ 1.0000000] cas0: interrupting at ivec 3780
[ 1.0000000] cas0: Ethernet address [_MAC_XXXXXXXXXX]
[ 1.0000000] gphyter0 at cas0 phy 1: DP83865 1000BASE-T media interface, rev. 8
[ 1.0000000] gphyter0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[ 1.0000000] gphyter0: strapped to slave mode
[ 1.0000000] cas1 at pci5 dev 1 function 0: National Semiconductor Saturn (rev. 0x30)
[ 1.0000000] cas1: interrupting at ivec 3781
[ 1.0000000] cas1: Ethernet address [_MAC_XXXXXXXXXX]
[ 1.0000000] gphyter1 at cas1 phy 1: DP83865 1000BASE-T media interface, rev. 8
[ 1.0000000] gphyter1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[ 1.0000000] gphyter1: strapped to slave mode
[ 1.0000000] esiop0 at pci5 dev 2 function 0: Symbios Logic 53c896 (ultra2-wide scsi)
[ 1.0000000] esiop0: using on-board RAM
[ 1.0000000] esiop0: interrupting at ivec 2f82
[ 1.0000000] scsibus0 at esiop0: 16 targets, 8 luns per target
[ 1.0000000] esiop1 at pci5 dev 2 function 1: Symbios Logic 53c896 (ultra2-wide scsi)
[ 1.0000000] esiop1: using on-board RAM
[ 1.0000000] esiop1: interrupting at ivec 2f83
[ 1.0000000] scsibus1 at esiop1: 16 targets, 8 luns per target
[ 1.0000000] ppb5 at pci1 dev 2 function 0: PLX Technology product 8532 (rev. 0x0a)
[ 1.0000000] ppb5: PCI Express capability version 1 <Downstream Port of PCI-E Switch> x4 @ 2.5GT/s
[ 1.0000000] pci6 at ppb5 bus 8
[ 1.0000000] mpt0 at pci6 dev 0 function 0: Symbios Logic SAS1068E (rev. 0x02)
[ 1.0000000] mpt0: interrupting at ivec 2f96
[ 1.0000000] mpt0: Phy 0: Link Status Unknown
[ 1.0000000] scsibus2 at mpt0: 112 targets, 8 luns per target
[ 1.0000000] ppb6 at pci1 dev 8 function 0: PLX Technology product 8532 (rev. 0xba)
[ 1.0000000] ppb6: PCI Express capability version 1 <Downstream Port of PCI-E Switch> x8 @ 2.5GT/s
[ 1.0000000] pci7 at ppb6 bus 9
[ 1.0000000] ppb7 at pci1 dev 9 function 0: PLX Technology product 8532 (rev. 0xba)
[ 1.0000000] ppb7: PCI Express capability version 1 <Downstream Port of PCI-E Switch> x8 @ 2.5GT/s
[ 1.0000000] pci8 at ppb7 bus 10
[ 1.0000000] pyro1 at mainbus0: "Fire", rev 3, ign 7c0, bus B 2 to 10
[ 1.0000000] pyro1: pci9 at pyro1
[ 1.0000000] ppb8 at pci9 dev 0 function 0: PLX Technology product 8532 (rev. 0xba)
[ 1.0000000] ppb8: PCI Express capability version 1 <Upstream Port of PCI-E Switch>
[ 1.0000000] pci10 at ppb8 bus 3
[ 1.0000000] ppb9 at pci10 dev 1 function 0: PLX Technology product 8532 (rev. 0x03)
[ 1.0000000] ppb9: PCI Express capability version 1 <Downstream Port of PCI-E Switch> x4 @ 2.5GT/s
[ 1.0000000] pci11 at ppb9 bus 4
[ 1.0000000] ppb10 at pci11 dev 0 function 0: Acer Labs M5249 Hypertransport to PCI Bridge (rev. 0x00)
[ 1.0000000] ppb10: PCI Express capability version 1 <PCI-E to PCI/PCI-X Bridge>
[ 1.0000000] pci12 at ppb10 bus 5
[ 1.0000000] ohci0 at pci12 dev 28 function 0: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03)
[ 1.0000000] ohci0: interrupting at ivec 7ca
[ 1.0000000] ohci0: OHCI version 1.0, legacy support
[ 1.0000000] usb0 at ohci0: USB revision 1.0
[ 1.0000000] ohci1 at pci12 dev 28 function 1: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03)
[ 1.0000000] ohci1: interrupting at ivec 7ca
[ 1.0000000] ohci1: OHCI version 1.0, legacy support
[ 1.0000000] usb1 at ohci1: USB revision 1.0
[ 1.0000000] ohci2 at pci12 dev 28 function 2: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03)
[ 1.0000000] ohci2: interrupting at ivec 7ca
[ 1.0000000] ohci2: OHCI version 1.0, legacy support
[ 1.0000000] usb2 at ohci2: USB revision 1.0
[ 1.0000000] ehci0 at pci12 dev 28 function 3: Acer Labs M5239 USB 2.0 Host Controller (rev. 0x01)
[ 1.0000000] ehci0: interrupting at ivec 7c9
[ 1.0000000] ehci0: 3 companion controllers, 3 ports each: ohci0 ohci1 ohci2
[ 1.0000000] usb3 at ehci0: USB revision 2.0
[ 1.0000000] ebus0 at pci12 dev 30 function 0: Acer Labs product 1575, revision 0x00
[ 1.0000000] rtc0 at ebus0 addr 70-73: mc146818 compatible time-of-day clock: m5823
[ 1.0000000] aceride0 at pci12 dev 31 function 0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc8)
[ 1.0000000] aceride0: using ivec 2fc8 for native-PCI interrupt
[ 1.0000000] atabus0 at aceride0 channel 0
[ 1.0000000] atabus1 at aceride0 channel 1
[ 1.0000000] ppb11 at pci10 dev 2 function 0: PLX Technology product 8532 (rev. 0x0b)
[ 1.0000000] ppb11: PCI Express capability version 1 <Downstream Port of PCI-E Switch> x4 @ 2.5GT/s
[ 1.0000000] pci13 at ppb11 bus 6
[ 1.0000000] ppb12 at pci13 dev 0 function 0: ServerWorks BCM5714/BCM5715 Integral PCI-E to PCI-X Bridge (rev. 0xb5)
[ 1.0000000] ppb12: PCI Express capability version 1 <PCI-E to PCI/PCI-X Bridge>
[ 1.0000000] pci14 at ppb12 bus 7
[ 1.0000000] bge2 at pci14 dev 4 function 0: Broadcom BCM5714 Gigabit Ethernet
[ 1.0000000] bge2: interrupting at ivec 37d6
[ 1.0000000] bge2: HW config 00000015, 00000015, 00000000, 00000000 00000000
[ 1.0000000] bge2: ASIC BCM5715 A3 (0x9003), Ethernet address [_MAC_XXXXXXXXXX]
[ 1.0000000] bge2: WARNING: failed to restrict dma range, falling back to parent bus dma range
[ 1.0000000] brgphy2 at bge2 phy 1: BCM5714 1000BASE-T/X media interface, rev. 0
[ 1.0000000] brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[ 1.0000000] bge3 at pci14 dev 4 function 1: Broadcom BCM5714 Gigabit Ethernet
[ 1.0000000] bge3: interrupting at ivec 37d7
[ 1.0000000] bge3: HW config 00000014, 00000014, 00000000, 00000000 00000000
[ 1.0000000] bge3: ASIC BCM5715 A3 (0x9003), Ethernet address [_MAC_XXXXXXXXXX]
[ 1.0000000] bge3: WARNING: failed to restrict dma range, falling back to parent bus dma range
[ 1.0000000] brgphy3 at bge3 phy 1: BCM5714 1000BASE-T/X media interface, rev. 0
[ 1.0000000] brgphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[ 1.0000000] ppb13 at pci14 dev 8 function 0: ServerWorks HT1000 PCI/PCI-X Bridge (rev. 0xb4)
[ 1.0000000] pci15 at ppb13 bus 8
[ 1.0000000] ppb14 at pci10 dev 8 function 0: PLX Technology product 8532 (rev. 0xba)
[ 1.0000000] ppb14: PCI Express capability version 1 <Downstream Port of PCI-E Switch> x8 @ 2.5GT/s
[ 1.0000000] pci16 at ppb14 bus 9
[ 1.0000000] ppb15 at pci10 dev 9 function 0: PLX Technology product 8532 (rev. 0xba)
[ 1.0000000] ppb15: PCI Express capability version 1 <Downstream Port of PCI-E Switch> x8 @ 2.5GT/s
[ 1.0000000] pci17 at ppb15 bus 10
[ 1.0000000] ebus1 at mainbus0
[ 1.0000000] flashprom at ebus1 addr 0-1fffff not configured
[ 1.0000000] gpio at ebus1 addr c00008-c00008 not configured
[ 1.0000000] power at ebus1 addr c0a100-c0a12f ipl 786 not configured
[ 1.0000000] rmc-comm at ebus1 addr c28000-c28007 ipl 789 not configured
[ 1.0000000] com0 at ebus1 addr c2c000-c2c007 ipl 787: ns16550a, 16-byte FIFO
[ 1.0000000] com0: console
[ 1.0000000] com1 at ebus1 addr fffff8-ffffff ipl 78a: ns16550a, 16-byte FIFO
[ 1.0000000] i2c at mainbus0 not configured
[ 1.0000000] pcons at mainbus0 not configured
[ 1.0000000] esiop0: switching to single-ended mode
[ 1.0000000] WARNING: system needs entropy for security; see entropy(7)
[ 1.0000152] No counter-timer -- using %stick at 10MHz as system clock.
[ 2.4967440] scsibus0: waiting 2 seconds for devices to settle...
[ 2.4967440] uhub0 at usb2: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
[ 2.4967440] uhub1 at usb0: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
[ 2.4967440] scsibus1: waiting 2 seconds for devices to settle...
[ 2.4967440] uhub2 at usb1: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
[ 2.4967440] uhub3 at usb3: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
[ 2.4967440] scsibus2: waiting 2 seconds for devices to settle...
[ 2.6631430] atapibus0 at atabus0: 2 targets
[ 2.7231430] cd0 at atapibus0 drive 0: <MATSHITADVD-RAM UJ-85JS, , F8W2> cdrom removable
[ 3.2031429] uhub4 at uhub3 port 7: vendor 04b4 (0x04b4) product 6560 (0x6560), class 9/0, rev 2.00/0.0b, addr 2
[ 3.3231429] uhub4: multiple transaction translators
[ 5.4331436] cd1 at scsibus0 target 3 lun 0: <ZULUSCSI, CDROM, 2.3W> cdrom removable
[ 5.5235473] cd1: sync (50.00ns offset 15), 16-bit (40.000MB/s) transfers
[ 13.3031425] sd0 at scsibus2 target 0 lun 0: <HITACHI, H101473SCSUN72G, SA25> disk fixed
[ 13.3931423] sd0: 70007 MB, 14089 cyl, 24 head, 424 sec, 512 bytes/sect x 143374738 sectors
[ 13.5031429] sd0: tagged queueing
[ 13.5531440] swwdog0: software watchdog initialized
[ 13.6131433] WARNING: 4 errors while detecting hardware; check system log.
[ 13.6931423] root on sd0a dumps on sd0b
[ 13.7431427] root file system type: ffs
[ 13.7831422] kern.module.path=/stand/sparc64/11.0/modules
[ 14.4998725] entropy: best effort
Thu Sep 25 09:35:28 EDT 2025
Starting root file system check:
/dev/rsd0a: file system is clean; not checking
Setting sysctl variables:
ddb.onpanic: 1 -> 0
swapctl: setting dump device to /dev/sd0b
swapctl: adding /dev/sd0b as swap device at priority 0
Starting file system checks:
[ 15.6598742] entropy: ready
Loaded entropy from /var/db/entropy-file.
Waiting for entropy...done
Setting tty flags.
Starting network.
Hostname: v445.localhost
IPv6 mode: host
Configuring network interfaces: bge0.
Adding interface aliases:.
Waiting for duplicate address detection to finish...
Starting dhcpcd.
Building databases: dev, utmp, utmpx.
Starting syslogd.
Setting date via ntp.
Mounting all file systems...
Clearing temporary files.
Checking quotas: done.
Setting securelevel: kern.securelevel: 0 -> 1
swapctl: setting dump device to /dev/sd0b
Starting virecover.
Checking for core dump...
savecore: no core dump
Starting local daemons:.
Updating motd.
Starting ntpd.
Starting sshd.
Starting inetd.
Starting cron.
Thu Sep 25 09:53:47 EDT 2025
NetBSD/sparc64 (v445.localhost) (constty)
login: root
Password:
Sep 25 09:53:57 v445 login: ROOT LOGIN (root) on tty constty
Last login: Thu Sep 25 09:49:04 2025 on constty
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
2024, 2025
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 11.0_BETA (GENERIC) #0: Wed Sep 24 12:39:13 UTC 2025
Welcome to NetBSD!
This is a beta release of NetBSD for testing.
Bug reports: https://www.NetBSD.org/support/send-pr.html
Donations to the NetBSD Foundation: https://www.NetBSD.org/donations/
We recommend that you create a non-root account and use su(1) for root access.
v445# dd if=/dev/rcd1 of=/dev/null bs=1m count=500
500+0 records in
500+0 records out
524288000 bytes transferred in 19.299 secs (27166588 bytes/sec)
v445# dd if=/dev/rsd0c of=/dev/null bs=1m count=500
500+0 records in
500+0 records out
524288000 bytes transferred in 5.871 secs (89301311 bytes/sec)