Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2025-09-29 19:56:30
From: tingo
Description: FreeBSD/amd64 on Beelink ME mini
igc0: link state changed to DOWN igc0: link state changed to UP Waiting (max 60 seconds) for system process `vnlru' to stop... done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining... 0 0 0 0 done All buffers synced. Uptime: 13m8s ---<<BOOT>>--- Copyright (c) 1992-2021 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 13.5-RELEASE releng/13.5-n259162-882b9f3f2218 GENERIC amd64 FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2) VT(efifb): resolution 1920x1080 CPU: Intel(R) N150 (806.40-MHz K8-class CPU) Origin="GenuineIntel" Id=0xb06e0 Family=0x6 Model=0xbe Stepping=0 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x121<LAHF,ABM,Prefetch> Structured Extended Features=0x239ca7eb<FSGSBASE,TSCADJ,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,PROCTRACE,SHA> Structured Extended Features2=0x98c007bc<UMIP,PKU,OSPKE,WAITPKG,GFNI,VAES,VPCLMULQDQ,RDPID,MOVDIRI,MOVDIR64B> Structured Extended Features3=0xfc184410<FSRM,MD_CLEAR,IBT,IBPB,STIBP,L1DFL,ARCH_CAP,CORE_CAP,SSBD> XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> IA32_ARCH_CAPS=0x1580fd6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO,TAA_NO> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr TSC: P-state invariant, performance statistics real memory = 12884901888 (12288 MB) avail memory = 12157493248 (11594 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <ALASKA A M I > WARNING: L3 data cache covers more APIC IDs than a package (7 > 3) FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" random: unblocking device. ioapic0 <Version 2.0> irqs 0-119 Launching APs: 3 2 1 random: entropy device external interface kbd0 at kbdmux0 efirtc0: <EFI Realtime Clock> efirtc0: registered as a time-of-day clock, resolution 1.000000s smbios0: <System Management BIOS> at iomem 0x75cd4000-0x75cd401e smbios0: Version: 3.6, BCD Revision: 3.6 aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> acpi0: <ALASKA A M I > acpi0: Power Button (fixed) hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 19200000 Hz quality 950 Event timer "HPET" frequency 19200000 Hz quality 550 Event timer "HPET1" frequency 19200000 Hz quality 440 Event timer "HPET2" frequency 19200000 Hz quality 440 Event timer "HPET3" frequency 19200000 Hz quality 440 Event timer "HPET4" frequency 19200000 Hz quality 440 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0x6000000000-0x6000ffffff,0x4000000000-0x400fffffff irq 16 at device 2.0 on pci0 vgapci0: Boot video device xhci0: <XHCI (generic) USB 3.0 controller> mem 0x6001130000-0x600113ffff at device 13.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 xhci1: <XHCI (generic) USB 3.0 controller> mem 0x6001120000-0x600112ffff irq 16 at device 20.0 on pci0 xhci1: 32 bytes context size, 64-bit DMA usbus1 on xhci1 usbus1: 5.0Gbps Super Speed USB v3.0 pci0: <memory, RAM> at device 20.2 (no driver attached) pci0: <network> at device 20.3 (no driver attached) pci0: <serial bus> at device 21.0 (no driver attached) pci0: <serial bus> at device 21.1 (no driver attached) pci0: <simple comms> at device 22.0 (no driver attached) sdhci_pci0: <Generic SD HCI> mem 0x600114f000-0x600114ffff irq 16 at device 26.0 on pci0 sdhci_pci0: 1 slot(s) allocated mmc0: <MMC/SD bus> on sdhci_pci0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pci1: <ACPI PCI bus> on pcib1 igc0: <Intel(R) Ethernet Controller I226-V> mem 0x80800000-0x808fffff,0x80900000-0x80903fff irq 16 at device 0.0 on pci1 igc0: EEPROM V2.25-0 eTrack 0x800003ad igc0: Using 1024 TX descriptors and 1024 RX descriptors igc0: Using 4 RX queues 4 TX queues igc0: Using MSI-X interrupts with 5 vectors igc0: Ethernet address: [_MAC_XXXXXXXXXX] igc0: netmap queues/slots: TX 4/1024, RX 4/1024 pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 pci2: <ACPI PCI bus> on pcib2 igc1: <Intel(R) Ethernet Controller I226-V> mem 0x80500000-0x805fffff,0x80600000-0x80603fff irq 17 at device 0.0 on pci2 igc1: EEPROM V2.25-0 eTrack 0x800003ad igc1: Using 1024 TX descriptors and 1024 RX descriptors igc1: Using 4 RX queues 4 TX queues igc1: Using MSI-X interrupts with 5 vectors igc1: Ethernet address: [_MAC_XXXXXXXXXX] igc1: netmap queues/slots: TX 4/1024, RX 4/1024 pcib3: <ACPI PCI-PCI bridge> irq 16 at device 29.0 on pci0 pci3: <ACPI PCI bus> on pcib3 nvme0: <Generic NVMe Device> mem 0x80a00000-0x80a03fff,0x80a04000-0x80a040ff irq 16 at device 0.0 on pci3 pci0: <simple comms> at device 30.0 (no driver attached) pci0: <serial bus> at device 30.3 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 hdac0: <Intel Alder Lake-N HDA Controller> mem 0x6001140000-0x6001143fff,0x6001000000-0x60010fffff irq 19 at device 31.3 on pci0 pci0: <serial bus> at device 31.5 (no driver attached) acpi_button0: <Sleep Button> on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_button1: <Power Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_syscontainer0: <System Container> on acpi0 acpi_syscontainer1: <System Container> on acpi0 atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 atrtc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 15. hwpstate_intel0: <Intel Speed Shift> on cpu0 cpufreq0: <CPU frequency control> on cpu0 hwpstate_intel1: <Intel Speed Shift> on cpu1 cpufreq1: <CPU frequency control> on cpu1 hwpstate_intel2: <Intel Speed Shift> on cpu2 cpufreq2: <CPU frequency control> on cpu2 hwpstate_intel3: <Intel Speed Shift> on cpu3 cpufreq3: <CPU frequency control> on cpu3 Timecounter "TSC" frequency 806400754 Hz quality 1000 Timecounters tick every 1.000 msec ugen1.1: <Intel XHCI root HUB> at usbus1 ugen0.1: <Intel XHCI root HUB> at usbus0 ZFS filesystem version: 5 uhub0 on usbus1 uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 uhub1 on usbus0 uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 ZFS storage pool version: features support (5000) mmcsd0: 63GB <MMCHC DV4064 0.1 SN 45FBB832 MFG 06/2024 by 69 0x0000> at mmc0 200.0MHz/8bit/8192-block mmcsd0boot0: 4MB partition 1 at mmcsd0 mmcsd0boot1: 4MB partition 2 at mmcsd0 mmcsd0rpmb: 17MB partition 3 at mmcsd0 nvme0: Allocated 200MB host memory buffer nvd0: <WD Blue SN570 1TB> NVMe namespace nvd0: 953869MB (1953525168 512 byte sectors) Trying to mount root from zfs:zroot/ROOT/default []... uhub1: 3 ports with 3 removable, self powered uhub0: 16 ports with 16 removable, self powered Root mount waiting for: usbus1 ugen1.2: <vendor 0x0461 HP USB Keyboard> at usbus1 ukbd0 on uhub0 ukbd0: <vendor 0x0461 HP USB Keyboard, class 0/0, rev 1.10/1.21, addr 1> on usbus1 kbd1 at ukbd0 ugen1.3: <vendor 0x8087 product 0x0026> at usbus1 Intel(R) Wireless WiFi based driver for FreeBSD iwlwifi0: <iwlwifi> mem 0x6001144000-0x6001147fff irq 16 at device 20.3 on pci0 iwlwifi0: Detected crf-id 0x501, cnv-id 0x80400 wfpm id 0x80000030 iwlwifi0: PCI dev 54f0/0244, rev=0x370, rfid=0x10c000 iwlwifi0: could not load firmware image 'iwlwifi-so-a0-hr-b0-83.ucode' iwlwifi0: File size way too small! iwlwifi0: could not load firmware image 'iwlwifi-so-a0-hr-b0-82.ucode' iwlwifi0: File size way too small! iwlwifi0: successfully loaded firmware image 'iwlwifi-so-a0-hr-b0-81.ucode' iwlwifi0: api flags index 2 larger than supported by driver iwlwifi0: TLV_FW_FSEQ_VERSION: FSEQ Version:[_IP_XXX] iwlwifi0: loaded firmware version 81.31fc9ae6.0 so-a0-hr-b0-81.ucode op_mode iwlmvm iwlwifi0: Detected Intel(R) Wi-Fi 6 AX101, REV=0x370 iwlwifi0: WRT: Invalid buffer destination: 0 iwlwifi0: WFPM_UMAC_PD_NOTIFICATION: 0x20 iwlwifi0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f iwlwifi0: WFPM_AUTH_KEY_0: 0x90 iwlwifi0: CNVI_SCU_SEQ_DATA_DW9: 0x10 iwlwifi0: Detected RF HR1 B3, rfid=0x10c000 iwlwifi0: RFIm is deactivated, reason = 4 iwlwifi0: base HW address: [_MAC_XXXXXXXXXX] ig4iic0: <Intel Alder Lake-M I2C Controller-0> at device 21.0 on pci0 ig4iic0: Using MSI iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0 ig4iic1: <Intel Alder Lake-M I2C Controller-1> at device 21.1 on pci0 ig4iic1: Using MSI iicbus1: <Philips I2C bus (ACPI-hinted)> on ig4iic1 ichsmb0: <Intel Alder Lake SMBus controller> port 0xefa0-0xefbf mem 0x600114c000-0x600114c0ff irq 16 at device 31.4 on pci0 smbus0: <System Management Bus> on ichsmb0 acpi_wmi0: <ACPI-WMI mapping> on acpi0 acpi_wmi0: cannot find EC device acpi_wmi0: Embedded MOF found ACPI: \134_SB.WFDE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) acpi_wmi1: <ACPI-WMI mapping> on acpi0 acpi_wmi1: cannot find EC device acpi_wmi1: Embedded MOF found ACPI: \134_SB.WFTE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) lo0: link state changed to UP uhid0 on uhub0 uhid0: <vendor 0x0461 HP USB Keyboard, class 0/0, rev 1.10/1.21, addr 1> on usbus1 igc0: link state changed to UP