Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2025-10-01 06:30:36
From: vlado
Description: FreeBSD 14.3-RELEASE on Intel(R) N100, LAN CT 82574L, and WiFI N 6300
---<<BOOT>>--- Copyright (c) 1992-2023 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 14.3-RELEASE releng/14.3-n271432-8c9ce319fef7 GENERIC amd64 FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2) VT(efifb): resolution 800x600 CPU: Intel(R) N100 (806.40-MHz K8-class CPU) Origin="GenuineIntel" Id=0xb06e0 Family=0x6 Model=0xbe Stepping=0 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x121<LAHF,ABM,Prefetch> Structured Extended Features=0x239ca7eb<FSGSBASE,TSCADJ,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,PROCTRACE,SHA> Structured Extended Features2=0x98c007bc<UMIP,PKU,OSPKE,WAITPKG,GFNI,VAES,VPCLMULQDQ,RDPID,MOVDIRI,MOVDIR64B> Structured Extended Features3=0xfc184410<FSRM,MD_CLEAR,IBT,IBPB,STIBP,L1DFL,ARCH_CAP,CORE_CAP,SSBD> XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> IA32_ARCH_CAPS=0x180fd6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO,TAA_NO> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr TSC: P-state invariant, performance statistics real memory = 17179869184 (16384 MB) avail memory = 16369090560 (15610 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <ALASKA A M I > WARNING: L3 data cache covers more APIC IDs than a package (7 > 3) FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" random: unblocking device. ioapic0 <Version 2.0> irqs 0-119 Launching APs: 2 1 3 random: entropy device external interface kbd1 at kbdmux0 efirtc0: <EFI Realtime Clock> efirtc0: registered as a time-of-day clock, resolution 1.000000s smbios0: <System Management BIOS> at iomem 0x77c2b000-0x77c2b017 smbios0: Entry point: v3 (64-bit), Version: 3.5 aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> acpi0: <ALASKA A M I > acpi0: Power Button (fixed) hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 19200000 Hz quality 950 Event timer "HPET" frequency 19200000 Hz quality 550 Event timer "HPET1" frequency 19200000 Hz quality 440 Event timer "HPET2" frequency 19200000 Hz quality 440 Event timer "HPET3" frequency 19200000 Hz quality 440 Event timer "HPET4" frequency 19200000 Hz quality 440 atrtc1: <AT realtime clock> on acpi0 atrtc1: Warning: Couldn't map I/O. atrtc1: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0x5000-0x503f mem 0x6000000000-0x6000ffffff,0x4000000000-0x400fffffff at device 2.0 on pci0 vgapci0: Boot video device xhci0: <XHCI (generic) USB 3.0 controller> mem 0x6001110000-0x600111ffff at device 13.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 xhci1: <XHCI (generic) USB 3.0 controller> mem 0x6001100000-0x600110ffff at device 20.0 on pci0 xhci1: 32 bytes context size, 64-bit DMA usbus1 on xhci1 usbus1: 5.0Gbps Super Speed USB v3.0 pci0: <memory, RAM> at device 20.2 (no driver attached) pci0: <simple comms> at device 22.0 (no driver attached) ahci0: <AHCI SATA controller> port 0x5090-0x5097,0x5080-0x5083,0x5060-0x507f mem 0x80b00000-0x80b01fff,0x80b03000-0x80b030ff,0x80b02000-0x80b027ff at device 23.0 on pci0 ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 pci1: <ACPI PCI bus> on pcib1 em0: <Intel(R) Gigabit CT 82574L> port 0x4000-0x401f mem 0x80ac0000-0x80adffff,0x80a00000-0x80a7ffff,0x80ae0000-0x80ae3fff at device 0.0 on pci1 em0: EEPROM V1.8-0 em0: Using 1024 TX descriptors and 1024 RX descriptors em0: Using 2 RX queues 2 TX queues em0: Using MSI-X interrupts with 3 vectors em0: Ethernet address: [_MAC_XXXXXXXXXX] em0: netmap queues/slots: TX 2/1024, RX 2/1024 pcib2: <ACPI PCI-PCI bridge> at device 28.2 on pci0 pci2: <ACPI PCI bus> on pcib2 iwn0: <Intel Centrino Ultimate-N 6300> mem 0x80900000-0x80901fff at device 0.0 on pci2 pcib3: <ACPI PCI-PCI bridge> at device 28.6 on pci0 pci3: <ACPI PCI bus> on pcib3 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x3000-0x30ff mem 0x80804000-0x80804fff,0x80800000-0x80803fff at device 0.0 on pci3 re0: Using 1 MSI-X message re0: ASPM disabled re0: Chip rev. 0x54000000 re0: MAC rev. 0x00100000 miibus0: <MII bus> on re0 rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: [_MAC_XXXXXXXXXX] re0: netmap queues/slots: TX 1/256, RX 1/256 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 hdac0: <Intel Alder Lake-N HDA Controller> mem 0x6001120000-0x6001123fff,0x6001000000-0x60010fffff at device 31.3 on pci0 pci0: <serial bus> at device 31.5 (no driver attached) acpi_button0: <Sleep Button> on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_button1: <Power Button> on acpi0 acpi_syscontainer0: <System Container> on acpi0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 15. atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s atrtc0: Can't map interrupt. atrtc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 15. hwpstate_intel0: <Intel Speed Shift> on cpu0 cpufreq0: <CPU frequency control> on cpu0 hwpstate_intel1: <Intel Speed Shift> on cpu1 cpufreq1: <CPU frequency control> on cpu1 hwpstate_intel2: <Intel Speed Shift> on cpu2 cpufreq2: <CPU frequency control> on cpu2 hwpstate_intel3: <Intel Speed Shift> on cpu3 cpufreq3: <CPU frequency control> on cpu3 Timecounter "TSC" frequency 806403153 Hz quality 1000 Timecounters tick every 1.000 msec ugen1.1: <Intel XHCI root HUB> at usbus1 ugen0.1: <Intel XHCI root HUB> at usbus0 uhub0 on usbus1 uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 uhub1 on usbus0 uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) hdacc0: <Realtek ALC897 HDA CODEC> at cad 0 on hdac0 hdaa0: <Realtek ALC897 Audio Function Group> at nid 1 on hdacc0 pcm0: <Realtek ALC897 (Rear Analog)> at nid 20 and 24,26 on hdaa0 pcm1: <Realtek ALC897 (Front Analog)> at nid 27 and 25 on hdaa0 Trying to mount root from zfs:zroot/ROOT/default []... ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <WDC WDS120G2G0A-00JH30 UE500000> ACS-2 ATA SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXXXXXX] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) ada0: Command Queueing enabled ada0: 114480MB (234455040 512 byte sectors) ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN> ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 ada1: <WDC WDS120G2G0A-00JH30 UE500000> ACS-2 ATA SATA 3.x device ada1: [_SERIAL_NUMBER_XXXXXXXXX] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) ada1: Command Queueing enabled ada1: 114480MB (234455040 512 byte sectors) ada1: quirks=0x3<4K,NCQ_TRIM_BROKEN> uhub1: 3 ports with 3 removable, self powered uhub0: 16 ports with 16 removable, self powered Root mount waiting for: usbus1 ugen1.2: <Lite-On Technology USB 1.1 2port downstream low power hub> at usbus1 uhub2 on uhub0 uhub2: <Lite-On Technology USB 1.1 2port downstream low power hub, class 9/0, rev 1.10/2.00, addr 1> on usbus1 uhub2: 3 ports with 2 removable, bus powered ugen1.3: <Lite-On Technology USB Productivity Option Keyboard( has the hub in 1 )> at usbus1 ukbd0 on uhub2 ukbd0: <Lite-On Technology USB Productivity Option Keyboard( has the hub in 1 ), class 0/0, rev 1.10/2.00, addr 2> on usbus1 Root mount waiting for: usbus1 kbd2 at ukbd0 ugen1.4: <Asmedia ASM107x> at usbus1 uhub3 on uhub0 uhub3: <Asmedia ASM107x, class 9/0, rev 2.10/2.00, addr 3> on usbus1 uhub3: MTT enabled uhub3: 4 ports with 4 removable, self powered Root mount waiting for: usbus1 ugen1.5: <vendor 0x05e3 USB2.0 Hub> at usbus1 uhub4 on uhub0 uhub4: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/60.60, addr 4> on usbus1 uhub4: MTT enabled uhub4: 4 ports with 4 removable, self powered Root mount waiting for: usbus1 ugen1.6: <Asmedia ASM107x> at usbus1 uhub5 on uhub0 uhub5: <Asmedia ASM107x, class 9/0, rev 3.00/2.00, addr 5> on usbus1 Root mount waiting for: usbus1 uhub5: 4 ports with 4 removable, self powered ichsmb0: <Intel Alder Lake SMBus controller> port 0xefa0-0xefbf mem 0x6001128000-0x60011280ff at device 31.4 on pci0 smbus0: <System Management Bus> on ichsmb0 acpi_wmi0: <ACPI-WMI mapping> on acpi0 acpi_wmi0: cannot find EC device acpi_wmi0: Embedded MOF found ACPI: \134_SB.WFDE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) acpi_wmi1: <ACPI-WMI mapping> on acpi0 acpi_wmi1: cannot find EC device acpi_wmi1: Embedded MOF found ACPI: \134_SB.WFTE.WQCC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) em0: link state changed to UP re0: link state changed to DOWN lo0: link state changed to UP em0: link state changed to DOWN uhid0 on uhub2 uhid0: <Lite-On Technology USB Productivity Option Keyboard( has the hub in 1 ), class 0/0, rev 1.10/2.00, addr 2> on usbus1 em0: link state changed to UP