Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2025-10-02 18:17:29
From: Ken Wellsch
Description: FreeBSD 14.3-STABLE on Sun X4100 M2
---<<BOOT>>---
Copyright (c) 1992-2023 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 14.3-STABLE #0 77e2ddc52: Thu Oct 2 11:02:18 EDT 2025
root@x4100m2:/usr/obj/usr/src/amd64.amd64/sys/X4100M2 amd64
FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2)
VT(vga): resolution 640x480
CPU: Dual-Core AMD Opteron(tm) Processor 2220 (2792.70-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0x40f13 Family=0xf Model=0x41 Stepping=3
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x2001<SSE3,CX16>
AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8>
SVM: NAsids=64
real memory = 17716740096 (16896 MB)
avail memory = 16626720768 (15856 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <SUN X4200 M2>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 2 package(s) x 2 core(s)
random: unblocking device.
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20221020/tbfadt-748)
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe1Block: 128/64 (20221020/tbfadt-748)
ioapic0: MADT APIC ID 4 != hw id 15
ioapic1: MADT APIC ID 6 != hw id 16
ioapic2: MADT APIC ID 7 != hw id 17
ioapic3: MADT APIC ID 5 != hw id 14
ioapic0 <Version 1.1> irqs 0-23
ioapic3 <Version 1.1> irqs 24-47
ioapic1 <Version 1.1> irqs 48-54
ioapic2 <Version 1.1> irqs 56-62
Launching APs: 1 2 3
random: entropy device external interface
kbd1 at kbdmux0
Deprecated code (to be removed in FreeBSD 15): MIDI sequencer: no longer needed or used
vtvga0: <VT VGA driver>
smbios0: <System Management BIOS> at iomem 0xf9dc0-0xf9dde
smbios0: Entry point: v2.1 (32-bit), Version: 2.3, BCD Revision: 2.3
aesni0: No AES or SHA support.
acpi0: <SUN X4200 M2>
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
attimer0: Can't map interrupt.
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed00fff on acpi0
Timecounter "HPET" frequency 25000000 Hz quality 950
hpet1: <High Precision Event Timer> iomem 0xfed10000-0xfed10fff on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
ohci0: <nVidia nForce CK804 USB Controller> mem 0xfe3ff000-0xfe3fffff irq 20 at device 2.0 on pci0
usbus0 on ohci0FreeBSD 14.3-STABLE
usbus0: 12Mbps Full Speed USB v1.0
ehci0: <NVIDIA nForce CK804 USB 2.0 controller> mem 0xfe3fec00-0xfe3fecff irq 21 at device 2.1 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
atapci0: <nVidia nForce CK804 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2000-0x200f at device 6.0 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
pcib1: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xc800-0xc8ff mem 0xfd000000-0xfdffffff,0xfe2ff000-0xfe2fffff irq 16 at device 3.0 on pci1
vgapci0: Boot video device
nfe0: <NVIDIA nForce4 CK804 MCP9 Networking Adapter> port 0xdc00-0xdc07 mem 0xfe3fd000-0xfe3fdfff irq 22 at device 10.0 on pci0
miibus0: <MII bus> on nfe0
e1000phy0: <Marvell 88E1111 Gigabit PHY> PHY 1 on miibus0
e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseSX, 1000baseSX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
nfe0: Using defaults for TSO: 65518/35/2048
nfe0: Ethernet address: [_MAC_XXXXXXXXXX]
pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI Host-PCI bridge> on acpi0
pci6: <ACPI PCI bus> on pcib6
pci6: <memory> at device 0.0 (no driver attached)
pci6: <memory> at device 1.0 (no driver attached)
nfe1: <NVIDIA nForce4 CK804 MCP9 Networking Adapter> port 0xfc00-0xfc07 mem 0xfeafe000-0xfeafefff irq 44 at device 10.0 on pci6
miibus1: <MII bus> on nfe1
e1000phy1: <Marvell 88E1111 Gigabit PHY> PHY 1 on miibus1
e1000phy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseSX, 1000baseSX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
nfe1: Using defaults for TSO: 65518/35/2048
nfe1: Ethernet address: [_MAC_XXXXXXXXXX]
pcib7: <ACPI PCI-PCI bridge> at device 11.0 on pci6
pci7: <ACPI PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> at device 12.0 on pci6
pci8: <ACPI PCI bus> on pcib8
pcib9: <ACPI PCI-PCI bridge> at device 13.0 on pci6
pci9: <ACPI PCI bus> on pcib9
pcib10: <ACPI PCI-PCI bridge> at device 14.0 on pci6
pci10: <ACPI PCI bus> on pcib10
pcib11: <ACPI PCI-PCI bridge> at device 16.0 on pci6
pci11: <ACPI PCI bus> on pcib11
pcib12: <ACPI PCI-PCI bridge> at device 17.0 on pci6
pci12: <ACPI PCI bus> on pcib12
em0: <Intel(R) Legacy PRO/1000 MT 82546EB (Copper)> port 0xec00-0xec3f mem 0xfe9e0000-0xfe9fffff irq 56 at device 1.0 on pci12
em0: EEPROM V15.255-15
em0: Using 1024 TX descriptors and 1024 RX descriptors
em0: Ethernet address: [_MAC_XXXXXXXXXX]
em0: netmap queues/slots: TX 1/1024, RX 1/1024
em1: <Intel(R) Legacy PRO/1000 MT 82546EB (Copper)> port 0xe800-0xe83f mem 0xfe9c0000-0xfe9dffff irq 57 at device 1.1 on pci12
em1: EEPROM V15.255-15
em1: Using 1024 TX descriptors and 1024 RX descriptors
em1: Ethernet address: [_MAC_XXXXXXXXXX]
em1: netmap queues/slots: TX 1/1024, RX 1/1024
mpt0: <LSILogic SAS/SATA Adapter> port 0xe400-0xe4ff mem 0xfe9bc000-0xfe9bffff,0xfe9a0000-0xfe9affff irq 58 at device 2.0 on pci12
mpt0: MPI Version=1.5.18.0
mpt0: Capabilities: ( RAID-0 RAID-1E RAID-1 )
mpt0: 0 Active Volumes (2 Max)
mpt0: 0 Hidden Drive Members (14 Max)
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc9fff,0xca000-0xcb7ff,0xcb800-0xcc7ff,0xcc800-0xcd7ff,0xd3800-0xd47ff pnpid ORM0000 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 15.
powernow0: <PowerNow! K8> on cpu0
cpufreq0: <CPU frequency control> on cpu0
cpufreq1: <CPU frequency control> on cpu1
cpufreq2: <CPU frequency control> on cpu2
cpufreq3: <CPU frequency control> on cpu3
Timecounters tick every 1.000 msec
ugen1.1: <nVidia EHCI root HUB> at usbus1
ugen0.1: <nVidia OHCI root HUB> at usbus0
uhub0 on usbus1
uhub1 on usbus0
uhub0: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub1: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Trying to mount root from zfs:zroot/ROOT/default []...
(aprobe0:ata0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00
(aprobe0:ata0:0:0:0): CAM status: CCB request was invalid
(aprobe0:ata0:0:0:0): Error 22, Unretryable error
da0 at mpt0 bus 0 scbus2 target 2 lun 0
da0: <ATA KINGSTON SA400S3 B1E1> Fixed Direct Access SPC-3 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXXXXXX]
da0: 300.000MB/s transfers
da0: Command Queueing enabled
da0: 114473MB (234441648 512 byte sectors)
uhub1: 7 ports with 7 removable, self powered
Root mount waiting for: usbus1
Root mount waiting for: usbus1
uhub0: 7 ports with 7 removable, self powered
Root mount waiting for: usbus1
ugen0.2: <vendor 0x0430 product 0x0005> at usbus0
ukbd0 on uhub1
ukbd0: <vendor 0x0430 product 0x0005, class 0/0, rev 1.00/1.02, addr 2> on usbus0
kbd2 at ukbd0
Root mount waiting for: usbus1
ugen0.3: <American Megatrends Inc. Virtual Keyboard and Mouse> at usbus0
ukbd1 on uhub1
ukbd1: <American Megatrends Inc. Virtual Keyboard and Mouse, class 0/0, rev 1.10/1.00, addr 3> on usbus0
kbd3 at ukbd1
CPU: Dual-Core AMD Opteron(tm) Processor 2220 (2792.58-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0x40f13 Family=0xf Model=0x41 Stepping=3
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x2001<SSE3,CX16>
AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8>
SVM: NAsids=64
ugen0.4: <American Megatrends Inc. Virtual Cdrom Device> at usbus0
umass0 on uhub1
umass0: <American Megatrends Inc. Virtual Cdrom Device, class 0/0, rev 1.10/1.00, addr 4> on usbus0
umass0: 8070i (ATAPI) over Bulk-Only; quirks = 0x0000
umass0:4:0: Attached to scbus4
cd0 at umass-sim0 bus 0 scbus4 target 0 lun 0
cd0: <AMI Virtual CDROM 1.00> Removable CD-ROM SCSI device
cd0: 1.000MB/s transfers
cd0: 0MB (1 0 byte sectors)
cd0: quirks=0x10<10_BYTE_ONLY>
nfe0: link state changed to DOWN
nfe1: link state changed to DOWN
em0: link state changed to UP
lo0: link state changed to UP
em0: link state changed to DOWN
ugen0.5: <American Megatrends Inc. Virtual Floppy Device> at usbus0
umass1 on uhub1
umass1: <American Megatrends Inc. Virtual Floppy Device, class 0/0, rev 1.10/1.00, addr 5> on usbus0
umass1: UFI over CBI with CCI; quirks = 0x0000
umass1:5:1: Attached to scbus5
em0: link state changed to UP
ums0 on uhub1
ums0: <American Megatrends Inc. Virtual Keyboard and Mouse, class 0/0, rev 1.10/1.00, addr 3> on usbus0
Security policy loaded: MAC/ntpd (mac_ntpd)
(da1:umass-sim1:1:0:0): got CAM status 0x444
(da1:umass-sim1:1:0:0): fatal error, failed to attach to device