Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2025-10-09 19:13:08
From: root
Description: FreeBSD/amd64 on Dell Inc. Inspiron 530
---<<BOOT>>--- Copyright (c) 1992-2023 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 14.3-RELEASE-p3 GENERIC amd64 FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2) VT(vga): resolution 640x480 CPU: Intel(R) Core(TM)2 Duo CPU E4600 @ 2.40GHz (2394.08-MHz K8-class CPU) Origin="GenuineIntel" Id=0x6fd Family=0x6 Model=0xf Stepping=13 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xe39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> TSC: P-state invariant, performance statistics real memory = 4294967296 (4096 MB) avail memory = 4101001216 (3911 MB) Event timer "LAPIC" quality 100 ACPI APIC Table: <DELL FX09 > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) random: unblocking device. Firmware Warning (ACPI): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/8 (20221020/tbfadt-748) Firmware Warning (ACPI): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/8 (20221020/tbfadt-748) Firmware Warning (ACPI): 32/64X length mismatch in FADT/PmTimerBlock: 32/8 (20221020/tbfadt-748) Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/8 (20221020/tbfadt-748) Firmware Warning (ACPI): Invalid length for FADT/Pm1aEventBlock: 8, using default 32 (20221020/tbfadt-850) Firmware Warning (ACPI): Invalid length for FADT/Pm1aControlBlock: 8, using default 16 (20221020/tbfadt-850) Firmware Warning (ACPI): Invalid length for FADT/PmTimerBlock: 8, using default 32 (20221020/tbfadt-850) ioapic0: MADT APIC ID 4 != hw id 0 ioapic0 <Version 2.0> irqs 0-23 Launching APs: 1 random: entropy device external interface kbd1 at kbdmux0 vtvga0: <VT VGA driver> smbios0: <System Management BIOS> at iomem 0xf0be0-0xf0bfe smbios0: Entry point: v2.1 (32-bit), Version: 2.5, BCD Revision: 2.5 aesni0: No AES or SHA support. acpi0: <DELL FX09 > acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 device_attach: hpet0 attach returned 12 atrtc0: <AT realtime clock> port 0x70-0x73 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xff00-0xff07 mem 0xfdf00000-0xfdf7ffff,0xd0000000-0xdfffffff,0xfd700000-0xfd7fffff irq 16 at device 2.0 on pci0 agp0: <Intel G33 SVGA controller> on vgapci0 WARNING: Device "agp" is Giant locked and may be deleted before FreeBSD 15.0. agp0: aperture size is 256M, detected 7164k stolen memory vgapci0: Boot video device em0: <Intel(R) 82562V-2 ICH9> port 0xfe00-0xfe1f mem 0xfdfc0000-0xfdfdffff,0xfdfff000-0xfdffffff irq 20 at device 25.0 on pci0 em0: EEPROM V1.1-2 em0: Using 1024 TX descriptors and 1024 RX descriptors em0: Using an MSI interrupt em0: Ethernet address: [_MAC_XXXXXXXXXX] em0: netmap queues/slots: TX 1/1024, RX 1/1024 uhci0: <Intel 82801I (ICH9) USB controller> port 0xfd00-0xfd1f irq 16 at device 26.0 on pci0 uhci0: LegSup = 0x2f00 usbus0 on uhci0 usbus0: 12Mbps Full Speed USB v1.0 uhci1: <Intel 82801I (ICH9) USB controller> port 0xfc00-0xfc1f irq 21 at device 26.1 on pci0 uhci1: LegSup = 0x2f00 usbus1 on uhci1 usbus1: 12Mbps Full Speed USB v1.0 uhci2: <Intel 82801I (ICH9) USB controller> port 0xfb00-0xfb1f irq 19 at device 26.2 on pci0 uhci2: LegSup = 0x2f00 usbus2 on uhci2 usbus2: 12Mbps Full Speed USB v1.0 ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfdffe000-0xfdffe3ff irq 18 at device 26.7 on pci0 usbus3: EHCI version 1.0 usbus3 on ehci0 usbus3: 480Mbps High Speed USB v2.0 hdac0: <Intel 82801I HDA Controller> mem 0xfdff4000-0xfdff7fff irq 22 at device 27.0 on pci0 pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 pci2: <ACPI PCI bus> on pcib3 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xce00-0xceff mem 0xfdcff000-0xfdcfffff,0xfdbfc000-0xfdbfffff irq 19 at device 0.0 on pci2 re0: Using 1 MSI-X message re0: Chip rev. 0x28000000 re0: MAC rev. 0x00300000 miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: [_MAC_XXXXXXXXXX] re0: netmap queues/slots: TX 1/256, RX 1/256 uhci3: <Intel 82801I (ICH9) USB controller> port 0xfa00-0xfa1f irq 23 at device 29.0 on pci0 usbus4 on uhci3 usbus4: 12Mbps Full Speed USB v1.0 uhci4: <Intel 82801I (ICH9) USB controller> port 0xf900-0xf91f irq 19 at device 29.1 on pci0 usbus5 on uhci4 usbus5: 12Mbps Full Speed USB v1.0 uhci5: <Intel 82801I (ICH9) USB controller> port 0xf800-0xf81f irq 18 at device 29.2 on pci0 usbus6 on uhci5 usbus6: 12Mbps Full Speed USB v1.0 ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfdffd000-0xfdffd3ff irq 23 at device 29.7 on pci0 usbus7: EHCI version 1.0 usbus7 on ehci1 usbus7: 480Mbps High Speed USB v2.0 pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci3: <ACPI PCI bus> on pcib4 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH9 SATA300 controller> port 0xf700-0xf707,0xf600-0xf603,0xf500-0xf507,0xf400-0xf403,0xf300-0xf30f,0xf200-0xf20f irq 19 at device 31.2 on pci0 ata2: <ATA channel> at channel 0 on atapci0 ata3: <ATA channel> at channel 1 on atapci0 atapci1: <Intel ICH9 SATA300 controller> port 0xf000-0xf007,0xef00-0xef03,0xee00-0xee07,0xed00-0xed03,0xec00-0xec0f,0xeb00-0xeb0f irq 19 at device 31.5 on pci0 ata4: <ATA channel> at channel 0 on atapci1 ata5: <ATA channel> at channel 1 on atapci1 acpi_tz0: <Thermal Zone> on acpi0 fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 15. est0: <Enhanced SpeedStep Frequency Control> on cpu0 cpufreq0: <CPU frequency control> on cpu0 cpufreq1: <CPU frequency control> on cpu1 Timecounter "TSC-low" frequency 1196999931 Hz quality 1000 Timecounters tick every 1.000 msec hdacc0: <Realtek ALC888 HDA CODEC> at cad 2 on hdac0 hdaa0: <Realtek ALC888 Audio Function Group> at nid 1 on hdacc0 pcm0: <Realtek ALC888 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa0 pcm1: <Realtek ALC888 (Front Analog)> at nid 27 and 25 on hdaa0 ugen7.1: <Intel EHCI root HUB> at usbus7 ugen0.1: <Intel UHCI root HUB> at usbus0 uhub0 on usbus7 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7 uhub1 on usbus0 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen6.1: <Intel UHCI root HUB> at usbus6 ugen3.1: <Intel EHCI root HUB> at usbus3 uhub2 on usbus6 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 uhub3 on usbus3 uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 ugen5.1: <Intel UHCI root HUB> at usbus5 ugen1.1: <Intel UHCI root HUB> at usbus1 uhub4 on usbus5 uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 uhub5 on usbus1 uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen4.1: <Intel UHCI root HUB> at usbus4 ugen2.1: <Intel UHCI root HUB> at usbus2 uhub6 on usbus2 uhub7 on usbus4 uhub7: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 Trying to mount root from ufs:/dev/ada0s1a [rw]... uhub1: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered uhub5: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub7: 2 ports with 2 removable, self powered uhub6: 2 ports with 2 removable, self powered Root mount waiting for: usbus3 usbus7 CAM fdc0: cmd 08 failed at in byte 1 of 1 fdc0: sense intr err reading stat reg 0 fdc0: cmd 08 failed at in byte 1 of 1 fdc0: sense intr err reading stat reg 0 fdc0: cmd 08 failed at in byte 1 of 1 fdc0: sense intr err reading stat reg 0 Root mount waiting for: usbus3 usbus7 CAM fdc0: cmd 08 failed at in byte 1 of 1 fdc0: sense intr err reading stat reg 0 uhub3: 6 ports with 6 removable, self powered uhub0: 6 ports with 6 removable, self powered ada0 at ata2 bus 0 scbus0 target 0 lun 0 ada0: <WDC WD10EURX-63UY4Y0 01.01A01> ACS-2 ATA SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXXXXXXXXX] ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) ada0: 953869MB (1953525168 512 byte sectors) ada0: quirks=0x1<4K> ada1 at ata5 bus 0 scbus3 target 0 lun 0 ada1: <ST3500418AS CC38> ATA8-ACS SATA 2.x device ada1: [_SERIAL_NUMBER_XXXXX] ada1: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) ada1: 476940MB (976773168 512 byte sectors) Root mount waiting for: usbus3 usbus7 usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device TEAC CA-200 (0x0644:0x0200) usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device TEAC CA-200 (0x0644:0x0200) usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device TEAC CA-200 (0x0644:0x0200) usb_msc_auto_quirk: UQ_MSC_NO_START_STOP set for USB mass storage device TEAC CA-200 (0x0644:0x0200) Root mount waiting for: usbus3 usbus7 ugen7.2: <TEAC CA-200> at usbus7 umass0 on uhub0 umass0: <TEAC CA-200, class 0/0, rev 2.00/4.08, addr 2> on usbus7 umass0: SCSI over Bulk-Only; quirks = 0xc005 umass0:4:0: Attached to scbus4 da0 at umass-sim0 bus 0 scbus4 target 0 lun 0 da0: <TEAC USB HS-CF Card 4.08> Removable Direct Access SCSI device da0: [_SERIAL_NUMBER_XXXXXXXXX] da0: 40.000MB/s transfers da0: Attempt to query device size failed: NOT READY, Medium not present da0: quirks=0x2<NO_6_BYTE> da1 at umass-sim0 bus 0 scbus4 target 0 lun 1 da1: <TEAC USB HS-xD/SM 4.08> Removable Direct Access SCSI device da1: [_SERIAL_NUMBER_XXXXXXXXX] da1: 40.000MB/s transfers da1: Attempt to query device size failed: NOT READY, Medium not present da1: quirks=0x2<NO_6_BYTE> da2 at umass-sim0 bus 0 scbus4 target 0 lun 2 da2: <TEAC USB HS-MS Card 4.08> Removable Direct Access SCSI device da2: [_SERIAL_NUMBER_XXXXXXXXX] da2: 40.000MB/s transfers da2: Attempt to query device size failed: NOT READY, Medium not present da2: quirks=0x2<NO_6_BYTE> da3 at umass-sim0 bus 0 scbus4 target 0 lun 3 da3: <TEAC USB HS-SD Card 4.08> Removable Direct Access SCSI device da3: [_SERIAL_NUMBER_XXXXXXXXX] da3: 40.000MB/s transfers da3: Attempt to query device size failed: NOT READY, Medium not present da3: quirks=0x2<NO_6_BYTE> Root mount waiting for: usbus3 Root mount waiting for: usbus3 Root mount waiting for: usbus3 Root mount waiting for: usbus3 Root mount waiting for: usbus3 usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device Seagate Desktop (0x0bc2:0x3300) usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device Seagate Desktop (0x0bc2:0x3300) usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage device Seagate Desktop (0x0bc2:0x3300) usb_msc_auto_quirk: UQ_MSC_NO_START_STOP set for USB mass storage device Seagate Desktop (0x0bc2:0x3300) Root mount waiting for: usbus3 ugen3.2: <Seagate Desktop> at usbus3 umass1 on uhub3 umass1: <Seagate Desktop, class 0/0, rev 2.00/1.30, addr 2> on usbus3 umass1: SCSI over Bulk-Only; quirks = 0xc005 umass1:5:1: Attached to scbus5 da4 at umass-sim1 bus 1 scbus5 target 0 lun 0 da4: <Seagate Desktop 0130> Fixed Direct Access SPC-2 SCSI device da4: [_SERIAL_NUMBER_XXXXX] da4: 40.000MB/s transfers da4: 476940MB (976773168 512 byte sectors) da4: quirks=0x2<NO_6_BYTE> WARNING: / was not properly dismounted ichsmb0: <Intel 82801I (ICH9) SMBus controller> port 0x500-0x51f mem 0xfdffc000-0xfdffc0ff irq 18 at device 31.3 on pci0 smbus0: <System Management Bus> on ichsmb0 em0: link state changed to UP re0: link state changed to DOWN lo0: link state changed to UP em0: link state changed to DOWN em0: link state changed to UP Accounting enabled