Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2025-10-29 05:00:56
From: woods
Description: NetBSD/i386 on Dell Computer Corporation PowerEdge 2650
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
2024, 2025
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 10.1_STABLE (GENERIC) #56: Sat Oct 4 00:34:58 PDT 2025
sysbuild@once:/home/sysbuild/i386/obj/home/sysbuild/src/sys/arch/i386/compile/GENERIC
total memory = 3839 MB
avail memory = 3746 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
mainbus0 (root)
ACPI: RSDP 0x00000000000FDC40 000014 (v00 DELL )
ACPI: RSDT 0x00000000000FDC54 000030 (v01 DELL PE2650 00000001 MSFT 0100000A)
ACPI: FACP 0x00000000000FDC84 000074 (v01 DELL PE2650 00000001 MSFT 0100000A)
ACPI: DSDT 0x00000000EFFE0000 00346A (v01 DELL PE2650 00000001 MSFT 0100000A)
ACPI: FACS 0x00000000EFFEFC00 000040
ACPI: APIC 0x00000000000FDCF8 000088 (v01 DELL PE2650 00000001 MSFT 0100000A)
ACPI: SPCR 0x00000000000FDD80 000050 (v01 DELL PE2650 00000001 MSFT 0100000A)
ACPI: 1 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 8: pa 0xfec00000, version 0x11, 16 pins
ioapic1 at mainbus0 apid 9: pa 0xfec01000, version 0x11, 16 pins
ioapic2 at mainbus0 apid 10: pa 0xfec02000, version 0x11, 16 pins
cpu0 at mainbus0 apid 0
cpu0: Use lfence to serialize rdtsc
cpu0: Intel(R) Xeon(TM) CPU 2.40GHz, id 0xf27
cpu0: node 0, package 0, core 0, smt 0
cpu1 at mainbus0 apid 6
cpu1: Intel(R) Xeon(TM) CPU 2.40GHz, id 0xf27
cpu1: node 0, package 3, core 0, smt 0
cpu2 at mainbus0 apid 1
cpu2: Intel(R) Xeon(TM) CPU 2.40GHz, id 0xf27
cpu2: node 0, package 0, core 0, smt 1
cpu3 at mainbus0 apid 7
cpu3: Intel(R) Xeon(TM) CPU 2.40GHz, id 0xf27
cpu3: node 0, package 3, core 0, smt 1
acpi0 at mainbus0: Intel ACPICA 20221020
acpi0: X/RSDT: OemId <DELL ,PE2650 ,00000001>, AslId <MSFT,0100000a>
allocated pic ioapic0 type level pin 9 level 6 to cpu0 slot 0 idt entry 96
LUSB: Links after initial probe:
Link Device LUSB:
Index IRQ Rtd Ref IRQs
0 5 N 0 3 4 5 6 7 10 11 12 14 polarity 1 trigger 0
LUSB: Links after initial validation:
Link Device LUSB:
Index IRQ Rtd Ref IRQs
0 5 N 0 3 4 5 6 7 10 11 12 14 polarity 1 trigger 0
LUSB: Links after disable:
Link Device LUSB:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 11 12 14 polarity 1 trigger 0
LUSB: ACPI: Found matching pin for 0.15.INTA at func 2: 5
acpi0: SCI interrupting at int 9
acpi0: fixed power button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
FPU (PNP0C04) at acpi0 not configured
pcppi1 at acpi0 (SPK, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x5f irq 0
FDC (PNP0700) at acpi0 not configured
COMA (PNP0501) at acpi0 not configured
COMB (PNP0501) at acpi0 not configured
MBIO (PNP0C01) at acpi0 not configured
apm0 at acpi0: Power Management spec V1.2
ACPI: Enabled 1 GPEs in block 20 to 3F
attimer1: attached to pcppi1
ipmi0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: ServerWorks CNB30-HE PCI Bridge (rev. 0x13)
pchb1 at pci0 dev 0 function 1: ServerWorks CNB30-HE PCI Bridge (rev. 0x00)
pci1 at pchb1 bus 3
pci1: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
bge0 at pci1 dev 6 function 0: Broadcom BCM5701 Gigabit Ethernet
allocated pic ioapic1 type level pin 12 level 6 to cpu0 slot 1 idt entry 97
bge0: interrupting at ioapic1 pin 12
bge0: HW config 00000019, 00000000, 00000000, 00000000 00000000
bge0: ASIC BCM5701 B5 (0x105), Ethernet address [_MAC_XXXXXXXXXX]
brgphy0 at bge0 phy 1: BCM5701 1000BASE-T media interface, rev. 0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge1 at pci1 dev 8 function 0: Broadcom BCM5701 Gigabit Ethernet
allocated pic ioapic1 type level pin 13 level 6 to cpu0 slot 2 idt entry 98
bge1: interrupting at ioapic1 pin 13
bge1: HW config 00000019, 00000000, 00000000, 00000000 00000000
bge1: ASIC BCM5701 B5 (0x105), Ethernet address [_MAC_XXXXXXXXXX]
brgphy1 at bge1 phy 1: BCM5701 1000BASE-T media interface, rev. 0
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
pchb2 at pci0 dev 0 function 2: ServerWorks product 0000 (rev. 0x00)
pchb2: autoconfiguration error: unknown ServerWorks chip ID 0x0000; trying to attach PCI buses behind it
pci2 at pchb2 bus 1
pci2: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
Dell Computer product 000c (undefined, subclass 0x00) at pci0 dev 4 function 0 not configured
Dell Computer PERC 3/Di (undefined, subclass 0x00) at pci0 dev 4 function 1 not configured
Dell Computer product 000d (undefined, subclass 0x00) at pci0 dev 4 function 2 not configured
vga0 at pci0 dev 14 function 0: ATI Technologies Rage XL (rev. 0x27)
wsdisplay0 at vga0 kbdmux 1
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
piixpm0 at pci0 dev 15 function 0: ServerWorks CSB5 South Bridge (rev. 0x93)
piixpm0: interrupting at SMI,
iic0 at piixpm0 port 0: I2C bus
rccide0 at pci0 dev 15 function 1: ServerWorks CSB5 IDE Controller (rev. 0x93)
rccide0: bus-master DMA support present
rccide0: primary channel configured to compatibility mode
allocated pic ioapic0 type edge pin 14 level 6 to cpu0 slot 3 idt entry 99
rccide0: primary channel interrupting at ioapic0 pin 14
atabus0 at rccide0 channel 0
rccide0: secondary channel wired to compatibility mode
allocated pic ioapic0 type edge pin 15 level 6 to cpu0 slot 4 idt entry 100
rccide0: secondary channel interrupting at ioapic0 pin 15
atabus1 at rccide0 channel 1
ohci0 at pci0 dev 15 function 2: ServerWorks OSB4/CSB5 USB Host Controller (rev. 0x05)
allocated pic ioapic0 type level pin 5 level 6 to cpu0 slot 5 idt entry 101
ohci0: interrupting at ioapic0 pin 5
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
pcib0 at pci0 dev 15 function 3: ServerWorks CSB5 ISA/LPC Bridge (rev. 0x00)
pchb3 at pci0 dev 16 function 0: ServerWorks CIOB-X2 PCI-X Bridge (rev. 0x03)
pci3 at pchb3 bus 3
pci3: i/o space, memory space enabled
bge2 at pci3 dev 6 function 0: Broadcom BCM5701 Gigabit Ethernet
bge2: autoconfiguration error: can't find mem space
bge3 at pci3 dev 8 function 0: Broadcom BCM5701 Gigabit Ethernet
bge3: autoconfiguration error: can't find mem space
pchb4 at pci0 dev 16 function 2: ServerWorks CIOB-X2 PCI-X Bridge (rev. 0x03)
pci4 at pchb4 bus 4
pci4: i/o space, memory space enabled
ppb0 at pci4 dev 8 function 0: Intel product 0309 (rev. 0x01)
pci5 at ppb0 bus 5
pci5: i/o space, memory space enabled
Adaptec (2nd PCI Vendor ID) AIC-7899F RAID (SCSI mass storage, vendor-specific, revision 0x01) at pci5 dev 6 function 0 not configured
Adaptec (2nd PCI Vendor ID) AIC-7899F RAID (SCSI mass storage, vendor-specific, revision 0x01) at pci5 dev 6 function 1 not configured
aac0 at pci4 dev 8 function 1: allocated pic ioapic1 type level pin 14 level 6 to cpu0 slot 6 idt entry 102
Dell PERC 3/Di
aac0: interrupting at ioapic1 pin 14
aac0: GETCOMMPREF appears untrustworthy. Ignoring.
aac0: i960RX at 100MHz, 128MB mem (118MB cache), optional battery present
aac0: Kernel 2.7-1 [Build 3170], Monitor 2.7-1 [Build 3170], S/N A441D3
aac0: Controller supports: 0x75c<WCACHE,DATA64,HOSTTIME,WINDOW4GB,SOFTERR,NORECOND,SGMAP64>
ld0 at aac0 unit 0: RAID 5
ld0: 135 GB, 17700 cyl, 255 head, 63 sec, 512 bytes/sect x 284365824 sectors
pchb5 at pci0 dev 17 function 0: ServerWorks CIOB-X2 PCI-X Bridge (rev. 0x03)
pci6 at pchb5 bus 1
pci6: i/o space, memory space enabled
pchb6 at pci0 dev 17 function 2: ServerWorks CIOB-X2 PCI-X Bridge (rev. 0x03)
pci7 at pchb6 bus 2
pci7: i/o space, memory space enabled
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, 16-byte FIFO
com0: console
allocated pic ioapic0 type edge pin 4 level 8 to cpu0 slot 7 idt entry 129
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, 16-byte FIFO
allocated pic ioapic0 type edge pin 3 level 8 to cpu0 slot 8 idt entry 130
pckbc0 at isa0 port 0x60-0x64
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
allocated pic ioapic0 type edge pin 6 level 6 to cpu0 slot 9 idt entry 103
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat 0 us, pow 0 mW
acpicpu1 at cpu1: ACPI CPU
acpicpu2 at cpu2: ACPI CPU
acpicpu3 at cpu3: ACPI CPU
timecounter: Timecounter "lapic" frequency 99622000 Hz quality -100
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 2390929080 Hz quality -100
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
uhub0 at usb0: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
IPsec: Initialized Security Association Processing.
ipmi0: autoconfiguration error: get_sdr_partial: recvcmd fails
ipmi0: autoconfiguration error: get header fails
ipmi0: autoconfiguration error: unable to register with sysmon
ipmi0: version 1.0 interface SMIC iobase 0xecf4/0x3 spacing 1
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <SAMSUNG CD-ROM SN-124, , N102> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(rccide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) (using DMA)
crypto: assign driver 0, flags 2
crypto: driver 0 registers alg 1 flags 0 maxoplen 0
crypto: driver 0 registers alg 2 flags 0 maxoplen 0
crypto: driver 0 registers alg 3 flags 0 maxoplen 0
crypto: driver 0 registers alg 4 flags 0 maxoplen 0
crypto: driver 0 registers alg 5 flags 0 maxoplen 0
crypto: driver 0 registers alg 26 flags 0 maxoplen 0
crypto: driver 0 registers alg 27 flags 0 maxoplen 0
crypto: driver 0 registers alg 29 flags 0 maxoplen 0
crypto: driver 0 registers alg 33 flags 0 maxoplen 0
crypto: driver 0 registers alg 17 flags 0 maxoplen 0
crypto: driver 0 registers alg 6 flags 0 maxoplen 0
crypto: driver 0 registers alg 19 flags 0 maxoplen 0
crypto: driver 0 registers alg 7 flags 0 maxoplen 0
crypto: driver 0 registers alg 20 flags 0 maxoplen 0
crypto: driver 0 registers alg 15 flags 0 maxoplen 0
crypto: driver 0 registers alg 24 flags 0 maxoplen 0
crypto: driver 0 registers alg 25 flags 0 maxoplen 0
crypto: driver 0 registers alg 8 flags 0 maxoplen 0
crypto: driver 0 registers alg 21 flags 0 maxoplen 0
crypto: driver 0 registers alg 16 flags 0 maxoplen 0
crypto: driver 0 registers alg 9 flags 0 maxoplen 0
crypto: driver 0 registers alg 10 flags 0 maxoplen 0
crypto: driver 0 registers alg 13 flags 0 maxoplen 0
crypto: driver 0 registers alg 14 flags 0 maxoplen 0
crypto: driver 0 registers alg 28 flags 0 maxoplen 0
crypto: driver 0 registers alg 30 flags 0 maxoplen 0
crypto: driver 0 registers alg 31 flags 0 maxoplen 0
crypto: driver 0 registers alg 32 flags 0 maxoplen 0
crypto: driver 0 registers alg 11 flags 0 maxoplen 0
crypto: driver 0 registers alg 18 flags 0 maxoplen 0
crypto: driver 0 registers alg 23 flags 0 maxoplen 0
crypto: driver 0 registers alg 22 flags 0 maxoplen 0
swwdog0: software watchdog initialized
WARNING: 6 errors while detecting hardware; check system log.
boot device: ld0
root on ld0a dumps on ld0b
root file system type: ffs
kern.module.path=/stand/i386/10.1/modules
/dev/ld0a: file system not clean (fs_clean=0); please fsck(8)
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
/dev/ld0a: file system not clean (fs_clean=0); please fsck(8)