Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.

Date: 2025-11-13 03:21:24
From: afresh1
Description: OpenBSD 7.8-current (GENERIC) riscv64 on Allwinner D1 Nezha
OpenBSD 7.8-current (GENERIC) #59: Wed Nov 12 10:39:03 MST 2025
    [_EMAIL_XXXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/riscv64/compile/GENERIC
real mem  = 1073741824 (1024MB)
avail mem = 1008242688 (961MB)
SBI: OpenSBI v1.7, SBI Specification Version 3.0
random: good seed from bootblocks
mainbus0 at root: Allwinner D1 Nezha
cpu0 at mainbus0: T-Head arch 0 imp 0 rv64imafdc
intc0 at cpu0
cpu0: 32KB 64b/line 128-way L1 I-cache, 32KB 64b/line 256-way L1 D-cache
"fit-images" at mainbus0 not configured
"dcxo-clk" at mainbus0 not configured
simplebus0 at mainbus0: "soc"
sxipio0 at simplebus0: 88 pins
sxiccmu0 at simplebus0
plic0 at simplebus0
sxitimer0 at simplebus0: 24000 kHz
sxidog0 at simplebus0
com0 at simplebus0: dw16550
com0: console
com1 at simplebus0: dw16550
"i2c" at simplebus0 not configured
"syscon" at simplebus0 not configured
"dma-controller" at simplebus0 not configured
"efuse" at simplebus0 not configured
"crypto" at simplebus0 not configured
"dram-controller" at simplebus0 not configured
sximmc0 at simplebus0
sdmmc0 at sximmc0: 4-bit, sd high-speed, mmc high-speed, dma
sximmc1 at simplebus0
sdmmc1 at sximmc1: 4-bit, sd high-speed, mmc high-speed, dma
"usb" at simplebus0 not configured
"phy" at simplebus0 not configured
ehci0 at simplebus0
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Generic EHCI root hub" rev 2.00/1.00 addr 1
ohci0 at simplebus0: version 1.0
ehci1 at simplebus0
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Generic EHCI root hub" rev 2.00/1.00 addr 1
ohci1 at simplebus0: version 1.0
dwxe0 at simplebus0: address [_MAC_XXXXXXXXXX]
rgephy0 at dwxe0 phy 1: RTL8169S/8110S/8211, rev. 6
"clock-controller" at simplebus0 not configured
"mixer" at simplebus0 not configured
"mixer" at simplebus0 not configured
"phy" at simplebus0 not configured
"tcon-top" at simplebus0 not configured
"lcd-controller" at simplebus0 not configured
"lcd-controller" at simplebus0 not configured
"power-controller" at simplebus0 not configured
"clock-controller" at simplebus0 not configured
sxirtc0 at simplebus0
sxidog1 at simplebus0
sxidog2 at simplebus0
gpio0 at sxipio0: 32 pins
gpio1 at sxipio0: 32 pins
gpio2 at sxipio0: 32 pins
gpio3 at sxipio0: 32 pins
gpio4 at sxipio0: 32 pins
gpio5 at sxipio0: 32 pins
gpio6 at sxipio0: 32 pins
usb2 at ohci0: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Generic OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci1: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Generic OHCI root hub" rev 1.00/1.00 addr 1
"opp-table-cpu" at mainbus0 not configured
"pmu" at mainbus0 not configured
"vcc" at mainbus0 not configured
"vcc-3v3" at mainbus0 not configured
"usbvbus" at mainbus0 not configured
"vdd-cpu" at mainbus0 not configured
"wifi-pwrseq" at mainbus0 not configured
"binman" at mainbus0 not configured
sdmmc1: can't enable card
umass0 at uhub1 port 1 configuration 1 interface 0 "USB SanDisk 3.2Gen1" rev 2.10/1.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <USB, SanDisk 3.2Gen1, 1.00> removable serial.07815583810786ac2d21
sd0: 29358MB, 512 bytes/sector, 60125184 sectors
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on sd0a (0f83db59e45e7b31.a) swap on sd0b dump on sd0b
sxiccmu_d1_set_frequency: 0x00000084
cpu0: clock not implemented