Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2025-12-04 19:11:35
From: vezhlys
Description: NetBSD 11.99.4 i386 on Biostar M7NCD Ultra (M7NCDU)/drives on VT6420
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
2024, 2025
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 11.99.4 (GENERIC) #34: Thu Dec 4 14:04:20 EET 2025
andriusv@agraphic-pc:/home/andriusv/obj/sys/arch/i386/compile/GENERIC
total memory = 511 MB
avail memory = 477 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
mainbus0 (root)
ACPI: RSDP 0x00000000000F72F0 000014 (v00 Nvidia)
ACPI: RSDT 0x000000001FFF3000 00002C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
ACPI: FACP 0x000000001FFF3040 000074 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
ACPI: DSDT 0x000000001FFF30C0 004C2D (v01 NVIDIA AWRDACPI 00001000 MSFT 0100000E)
ACPI: FACS 0x000000001FFF0000 000040
ACPI: APIC 0x000000001FFF7D00 00006E (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
ACPI: 1 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x11, 24 pins
cpu0 at mainbus0 apid 0
cpu0: Use cpuid to serialize rdtsc
cpu0: AMD Athlon(tm) XP 1500+, id 0x681
cpu0: node 0, package 0, core 0, smt 0
cpu0: searching errata for cpu revision 0x00000781
acpi0 at mainbus0: Intel ACPICA 20250807
acpi0: X/RSDT: OemId <Nvidia,AWRDACPI,42302e31>, AslId <AWRD,00000000>
acpi0: SCI interrupting at int 9
acpi0: fixed power button present
ACPI Error: Could not enable SleepButton event (20250807/evxfevnt-346)
ACPI Warning: Could not enable fixed event - SleepButton (3) (20250807/evxface-855)
acpi0: autoconfiguration error: failed to register fixed event 3: AE_NO_HARDWARE_RESPONSE
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
MEM (PNP0C01) at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
COPR (PNP0C04) at acpi0 not configured
FDC0 (PNP0700) at acpi0 not configured
UAR1 (PNP0501) at acpi0 not configured
LPT1 (PNP0400) at acpi0 not configured
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
joy0 at acpi0 (GAME, PNPB02F): io 0x200-0x207
joy0: joystick not connected
mpu0 at acpi0 (MIDI, PNPB006): io 0x330-0x331 irq 10
midi1 at mpu0: Roland MPU-401 MIDI UART
acpifan0 at acpi0 (FAN, PNP0C0B): ACPI Fan
acpitz0 at acpi0 (THRM): cpu0
acpitz0: active cooling level 0: 100.0C
acpitz0: levels: critical 100.0 C, passive 100.0 C
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pci0 at mainbus0 bus 0: configuration mode 1
pci0: This pci host supports neither MSI nor MSI-X.
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: NVIDIA nForce2 Host-PCI Bridge (rev. 0xa2)
agp at pchb0 not configured
NVIDIA nForce2 Memory Controller (RAM memory, revision 0xa2) at pci0 dev 0 function 1 not configured
NVIDIA nForce2 Memory Controller (RAM memory, revision 0xa2) at pci0 dev 0 function 2 not configured
NVIDIA nForce2 Memory Controller (RAM memory, revision 0xa2) at pci0 dev 0 function 3 not configured
NVIDIA nForce2 Memory Controller (RAM memory, revision 0xa2) at pci0 dev 0 function 4 not configured
NVIDIA nForce2 Memory Controller (RAM memory, revision 0xa2) at pci0 dev 0 function 5 not configured
pcib0 at pci0 dev 1 function 0: NVIDIA nForce2 PCI-ISA Bridge (rev. 0xa4)
nfsmbc0 at pci0 dev 1 function 1: NVIDIA nForce2 SMBus Controller (rev. 0xa2)
nfsmb0 at nfsmbc0 SMBus 1
iic0 at nfsmb0: I2C bus
nfsmb1 at nfsmbc0 SMBus 2
iic1 at nfsmb1: I2C bus
ohci0 at pci0 dev 2 function 0: NVIDIA nForce2 USB Host Controller (rev. 0xa4)
APCF: Picked IRQ 20 with weight 0
ohci0: interrupting at ioapic0 pin 20
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ohci1 at pci0 dev 2 function 1: NVIDIA nForce2 USB Host Controller (rev. 0xa4)
APCG: Picked IRQ 21 with weight 0
ohci1: interrupting at ioapic0 pin 21
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
ehci0 at pci0 dev 2 function 2: NVIDIA nForce2 USB2 Host Controller (rev. 0xa4)
ehci0: 32-bit DMA
APCL: Picked IRQ 22 with weight 0
ehci0: interrupting at ioapic0 pin 22
ehci0: EHCI version 1.0
ehci0: 2 companion controllers, 4 ports each: ohci0 ohci1
ehci0: Using DMA subregion for control data structures
usb2 at ehci0: USB revision 2.0
nfe0 at pci0 dev 4 function 0: NVIDIA nForce2 Ethernet (rev. 0xa1)
APCH: Picked IRQ 20 with weight 1
nfe0: interrupting at ioapic0 pin 20
nfe0: Ethernet address [_MAC_XXXXXXXXXX]
rlphy0 at nfe0 phy 1: RTL8201L 10/100 media interface, rev. 1
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
auich0 at pci0 dev 6 function 0: nForce2 MCP-T AC-97 Audio
APCJ: Picked IRQ 21 with weight 1
auich0: interrupting at ioapic0 pin 21
auich0: ac97: Avance Logic ALC655 codec; no 3D stereo
auich0: ac97: ext id 0x9c4<AC97_23,LDAC,SDAC,CDAC,SPDIF>
ppb0 at pci0 dev 8 function 0: NVIDIA nForce2 PCI-PCI Bridge (rev. 0xa3)
pci1 at ppb0 bus 1
pci1: This pci host supports neither MSI nor MSI-X.
pci1: i/o space, memory space enabled
vga0 at pci1 dev 6 function 0: S3 ViRGE/DX (rev. 0x01)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
viaide0 at pci1 dev 11 function 0: VIA Technologies VT8237 SATA Controller (rev. 0x50)
viaide0: bus-master DMA support present
viaide0: primary channel wired to native-PCI mode
viaide0: using ioapic0 pin 17 for native-PCI interrupt
atabus0 at viaide0 channel 0
viaide0: secondary channel wired to native-PCI mode
atabus1 at viaide0 channel 1
viaide1 at pci1 dev 11 function 1: VIA Technologies VT6420 IDE controller (rev. 0x80)
viaide1: bus-master DMA support present
viaide1: primary channel wired to native-PCI mode
viaide1: using ioapic0 pin 18 for native-PCI interrupt
atabus2 at viaide1 channel 0
viaide1: secondary channel wired to native-PCI mode
atabus3 at viaide1 channel 1
viaide2 at pci0 dev 9 function 0: NVIDIA nForce2 IDE Controller (rev. 0xa2)
viaide2: bus-master DMA support present
viaide2: primary channel configured to compatibility mode
viaide2: primary channel interrupting at ioapic0 pin 14
atabus4 at viaide2 channel 0
viaide2: secondary channel configured to compatibility mode
viaide2: secondary channel interrupting at ioapic0 pin 15
atabus5 at viaide2 channel 1
ppb1 at pci0 dev 30 function 0: NVIDIA nForce2 PCI-PCI Bridge (rev. 0xa2)
pci2 at ppb1 bus 2
pci2: This pci host supports neither MSI nor MSI-X.
pci2: i/o space, memory space enabled
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, 16-byte FIFO
lpt0 at isa0 port 0x378-0x37b irq 7
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat 0 us, pow 0 mW
WARNING: system needs entropy for security; see entropy(7)
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
audio0 at auich0: playback, capture, full duplex, independent
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
IPsec: Initialized Security Association Processing.
uhub0 at usb0: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
uhub1 at usb1: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
uhub2 at usb2: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
uhub2: 6 ports with 6 removable, self powered
viaide0 port 0: device present, speed: 1.5Gb/s
viaide0 port 1: device present, speed: 1.5Gb/s
wd0 at atabus0 drive 0
wd0: <SAMSUNG HD080HJ>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 7, NCQ (32 tags)
wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd1 at atabus1 drive 0
wd1: <SAMSUNG HD080HJ>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 76318 MB, 155058 cyl, 16 head, 63 sec, 512 bytes/sect x 156299375 sectors
wd1: GPT GUID: 2d8e637f-9cae-4225-8223-0e6d3ea68cf6
dk0 at wd1: "0feb0b8d-1c4d-41dd-b147-48d69e6eca08", 156299308 blocks at 34, type: ffs
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 7, NCQ (32 tags)
wd1(viaide0:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd2 at atabus2 drive 0
wd2: <SAMSUNG SP0842N>
wd2: drive supports 16-sector PIO transfers, LBA48 addressing
wd2: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors
wd2: 32-bit data port
wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd3 at atabus2 drive 1
wd3: <WDC WD800JB-00ETA0>
wd3: drive supports 16-sector PIO transfers, LBA48 addressing
wd3: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors
ehci0: handing over full speed device on port 1 to ohci0
wd3: 32-bit data port
wd3: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd2(viaide1:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
wd3(viaide1:0:1): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
umass0 at uhub2 port 2 configuration 1 interface 0
umass0: Generic (0x21c4) USB Storage (0xb064), rev 2.10/0.09, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 3 luns per target
sd0 at scsibus0 target 0 lun 0: <Generic, MassStorageClass, 0009> disk removable
sd0: fabricating a geometry
sd0: 115 GB, 118720 cyl, 64 head, 32 sec, 512 bytes/sect x 243138560 sectors
sd0: fabricating a geometry
sd1 at scsibus0 target 0 lun 1: <Generic, MassStorageClass, 0009> disk removable
sd1: drive offline
sd2 at scsibus0 target 0 lun 2: <Generic, MassStorageClass, 0009> disk removable
sd2: drive offline
swwdog0: software watchdog initialized
WARNING: 1 error while detecting hardware; check system log.
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs
kern.module.path=/stand/i386/11.99.4/modules
entropy: best effort
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)