Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2025-12-07 13:23:03
From: mickywickyftw
Description: QNAP VS-2108 Pro+ with upgraded CPU
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
2024, 2025
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 11.0_BETA (GENERIC) #0: Fri Dec 5 13:10:56 UTC 2025
[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/amd64/compile/GENERIC
total memory = 8017 MB
avail memory = 7723 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
i915drmkms* disabled
ulpt* disabled
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
efi: systbl at pa d660bf18
mainbus0 (root)
ACPI: RSDP 0x00000000D5FE0000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000D5FE0078 000074 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000D5FEA6F0 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000D5FE0188 00A562 (v02 ALASKA A M I 00000024 INTL 20051117)
ACPI: FACS 0x00000000D627B080 000040
ACPI: APIC 0x00000000D5FEA800 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000D5FEA898 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: ASF! 0x00000000D5FEA8E0 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: MCFG 0x00000000D5FEA988 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 0x00000000D5FEA9C8 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 0x00000000D5FEAA00 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: SSDT 0x00000000D5FEAD70 0009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 0x00000000D5FEB720 000B22 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: DMAR 0x00000000D5FEC248 0000B0 (v01 INTEL SNB 00000001 INTL 00000001)
ACPI: 4 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0
cpu0: Use lfence to serialize rdtsc
cpu0: Intel(R) Core(TM) i7-3770S CPU @ 3.10GHz, id 0x306a9
cpu0: node 0, package 0, core 0, smt 0
cpu1 at mainbus0 apid 2
cpu1: Intel(R) Core(TM) i7-3770S CPU @ 3.10GHz, id 0x306a9
cpu1: node 0, package 0, core 1, smt 0
cpu2 at mainbus0 apid 4
cpu2: Intel(R) Core(TM) i7-3770S CPU @ 3.10GHz, id 0x306a9
cpu2: node 0, package 0, core 2, smt 0
cpu3 at mainbus0 apid 6
cpu3: Intel(R) Core(TM) i7-3770S CPU @ 3.10GHz, id 0x306a9
cpu3: node 0, package 0, core 3, smt 0
cpu4 at mainbus0 apid 1
cpu4: Intel(R) Core(TM) i7-3770S CPU @ 3.10GHz, id 0x306a9
cpu4: node 0, package 0, core 0, smt 1
cpu5 at mainbus0 apid 3
cpu5: Intel(R) Core(TM) i7-3770S CPU @ 3.10GHz, id 0x306a9
cpu5: node 0, package 0, core 1, smt 1
cpu6 at mainbus0 apid 5
cpu6: Intel(R) Core(TM) i7-3770S CPU @ 3.10GHz, id 0x306a9
cpu6: node 0, package 0, core 2, smt 1
cpu7 at mainbus0 apid 7
cpu7: Intel(R) Core(TM) i7-3770S CPU @ 3.10GHz, id 0x306a9
cpu7: node 0, package 0, core 3, smt 1
acpi0 at mainbus0: Intel ACPICA 20241212
acpi0: X/RSDT: OemId <ALASKA, A M I,01072009>, AslId <AMI ,00010013>
acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f8000000
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF98D8571B1008 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF98D9658048C8 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF98D857165A08 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
acpi0: SCI interrupting at int 9
acpi0: fixed power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
TPMX (PNP0C01) at acpi0 not configured
FWHD (INT0800) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
CIR (FIT0002) at acpi0 not configured
com0 at acpi0 (UAR1, PNP0501-1): io 0x3f8-0x3ff irq 4
com0: ns16550a, 16-byte FIFO
com1 at acpi0 (UAR2, PNP0501-2): io 0x2f8-0x2ff irq 3
com1: ns16550a, 16-byte FIFO
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output Device
acpiout0: brightness levels: [0-100]
acpiout1 at acpivga0 (DD02, 0x0400): ACPI Display Output Device
acpiout1: brightness levels: [0-100]
acpiout2 at acpivga0 (DD03, 0x0300): ACPI Display Output Device
acpiout2: brightness levels: [0-100]
acpiout3 at acpivga0 (DD04, 0x0301): ACPI Display Output Device
acpiout3: brightness levels: [0-100]
acpiout4 at acpivga0 (DD05, 0x0302): ACPI Display Output Device
acpiout4: brightness levels: [0-100]
acpiout5 at acpivga0 (DD06, 0x0303): ACPI Display Output Device
acpiout5: brightness levels: [0-100]
acpiout6 at acpivga0 (DD07, 0x0304): ACPI Display Output Device
acpiout6: brightness levels: [0-100]
acpiout7 at acpivga0 (DD08, 0x0305): ACPI Display Output Device
acpiout7: brightness levels: [0-100]
acpivga0: connected output devices:
acpivga0: 0x0400 (acpiout1): Unknown Output Device, head 0
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
MEM2 (PNP0C01) at acpi0 not configured
acpifan0 at acpi0 (FAN0, PNP0C0B-0): ACPI Fan
acpifan1 at acpi0 (FAN1, PNP0C0B-1): ACPI Fan
acpifan2 at acpi0 (FAN2, PNP0C0B-2): ACPI Fan
acpifan3 at acpi0 (FAN3, PNP0C0B-3): ACPI Fan
acpifan4 at acpi0 (FAN4, PNP0C0B-4): ACPI Fan
acpitz0 at acpi0 (TZ00)
acpitz0: active cooling level 0: 93.0C
acpitz0: active cooling level 1: 55.0C
acpitz0: active cooling level 2: 0.0C
acpitz0: active cooling level 3: 0.0C
acpitz0: active cooling level 4: 0.0C
acpitz0: levels: critical 104.0 C
acpitz1 at acpi0 (TZ01): cpu0 cpu1 cpu2 cpu3 cpu4 cpu5 cpu6 cpu7
acpitz1: levels: critical 104.0 C, passive 104.0 C, passive cooling
ACPI: Enabled 4 GPEs in block 00 to 3F
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: Intel Ivy Bridge Host Bridge (rev. 0x09)
genfb0 at pci0 dev 2 function 0: Intel Ivy Bridge Integrated Graphics Device (rev. 0x09)
genfb0: framebuffer at 0xe0000000, size 1280x1024, depth 32, stride 5120
genfb0: shadow framebuffer enabled, size 5120 KB
wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at genfb0 not configured
Intel 6 Series Chipset Family MEI (miscellaneous communications, revision 0x04) at pci0 dev 22 function 0 not configured
wm0 at pci0 dev 25 function 0, 64-bit DMA: PCH2 LAN (82579LM) Controller (rev. 0x05)
wm0: interrupting at msi0 vec 0
wm0: PCI-Express bus
wm0: 2048 words FLASH, version 0.13.4
wm0: RX packet buffer size: 26KB
wm0: Ethernet address [_MAC_XXXXXXXXXX]
wm0: 0x6a4080<FLASH,PCIE,ASF_FIRM,AMT,WOL,EEE>
ihphy0 at wm0 phy 2: i82579 10/100/1000 media interface, rev. 3
ihphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ehci0 at pci0 dev 26 function 0: Intel 6 Series Chipset Family USB (rev. 0x05)
ehci0: 64-bit DMA
ehci0: interrupting at ioapic0 pin 16
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: Using DMA subregion for control data structures
usb0 at ehci0: USB revision 2.0
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at msi1 vec 0
hdaudio0: HDA ver. 1.0, OSS 4, ISS 4, BSS 0, SDO 1, 64-bit
hdafg0 at hdaudio0: Realtek ALC662
hdafg0: autoconfiguration error: duplicate pin in association
hdafg0: DAC00 2ch: Speaker [Jack]
hdafg0: DAC01 2ch: Speaker [Jack]
hdafg0: ADC03 2ch: Mic In [Jack]
hdafg0: 2ch/2ch 44100Hz 48000Hz 96000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: playback, capture, full duplex, independent
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
spkr0 at audio0: PC Speaker (synthesized)
wsbell at spkr0 not configured
hdafg1 at hdaudio0: Intel product 2805
hdafg1: DP00 8ch: Digital Out [Jack]
hdafg1: DP01 8ch: Digital Out [Jack]
hdafg1: 8ch/0ch 48000Hz PCM16*
audio1 at hdafg1: playback, capture, full duplex, independent
audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
spkr1 at audio1: PC Speaker (synthesized)
wsbell at spkr1 not configured
ppb0 at pci0 dev 28 function 0: Intel 6 Series Chipset Family PCIe Root Port 1 (rev. 0xb5)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb0: link is x1 @ 2.5GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
wm1 at pci1 dev 0 function 0, 64-bit DMA: Intel i82574L (rev. 0x00)
wm1: for TX and RX interrupting at msix2 vec 0 affinity to 1
wm1: for TX and RX interrupting at msix2 vec 1 affinity to 2
wm1: for LINK interrupting at msix2 vec 2
wm1: PCI-Express bus
wm1: 4096 words (8 address bits) SPI EEPROM, version 1.6.0, Image Unique ID ffffffff
wm1: ASPM L0s and L1 are disabled to workaround the errata.
wm1: RX packet buffer size: 20KB
wm1: Ethernet address [_MAC_XXXXXXXXXX]
wm1: 0x224040<SPI,PCIE,ASF_FIRM,WOL>
makphy0 at wm1 phy 1: Marvell 88E1149 Gigabit PHY, rev. 1
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb1 at pci0 dev 28 function 2: Intel 6 Series Chipset Family PCIe Root Port 3 (rev. 0xb5)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
xhci0 at pci2 dev 0 function 0: Etron Technology, Inc. EJ168 USB 3.0 xHCI (rev. 0x01)
xhci0: 64-bit DMA
xhci0: interrupting at msi3 vec 0
xhci0: xHCI version 1.0
usb1 at xhci0: USB revision 3.0
usb2 at xhci0: USB revision 2.0
ppb2 at pci0 dev 28 function 4: Intel 6 Series Chipset Family PCIe Root Port 5 (rev. 0xb5)
ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x2 @ 5.0GT/s
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ahcisata0 at pci3 dev 0 function 0: Marvell 88SE9235 SATA Controller (rev. 0x10)
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.0, 4 ports, 32 slots, CAP 0xe237ff23<SXS,PSC,SSC,PMD,FBSS,SPM,SAM,ISS=0x3=Gen3,SAL,SSNTF,SNCQ,S64A>
ahcisata0: interrupting at msi4 vec 0
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 2
atabus3 at ahcisata0 channel 3
ehci1 at pci0 dev 29 function 0: Intel 6 Series Chipset Family USB (rev. 0x05)
ehci1: 64-bit DMA
ehci1: interrupting at ioapic0 pin 23
ehci1: BIOS has given up ownership
ehci1: EHCI version 1.0
ehci1: Using DMA subregion for control data structures
usb3 at ehci1: USB revision 2.0
ichlpcib0 at pci0 dev 31 function 0: Intel H61 LPC (rev. 0x05)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
tco0 at ichlpcib0: TCO (watchdog) timer configured.
tco0: Min/Max interval 1/367 seconds
ahcisata1 at pci0 dev 31 function 2: Intel 6 Series Chipset Family AHCI 1 (rev. 0x05)
ahcisata1: 64-bit DMA
ahcisata1: AHCI revision 1.30, 4 ports, 32 slots, CAP 0xc720ff43<EMS,PSC,SSC,PMD,ISS=0x2=Gen2,SCLO,SAL,SALP,SNCQ,S64A>
ichsmb0 at pci0 dev 31 function 3: Intel 6 Series Chipset Family SMBus Controller (rev. 0x05)
ichsmb0: interrupting at ioapic0 pin 18
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
pckbc0 at isa0 port 0x60-0x64
pcppi0 at isa0 port 0x61
spkr2 at pcppi0: PC Speaker
wsbell at spkr2 not configured
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: C2: FFH, lat 59 us, pow 500 mW
acpicpu0: P0: FFH, lat 10 us, pow 65000 mW, 3101 MHz, turbo boost
acpicpu0: P1: FFH, lat 10 us, pow 65000 mW, 3100 MHz
acpicpu0: P2: FFH, lat 10 us, pow 61690 mW, 3000 MHz
acpicpu0: P3: FFH, lat 10 us, pow 59079 mW, 2900 MHz
acpicpu0: P4: FFH, lat 10 us, pow 56516 mW, 2800 MHz
acpicpu0: P5: FFH, lat 10 us, pow 54000 mW, 2700 MHz
acpicpu0: P6: FFH, lat 10 us, pow 50918 mW, 2600 MHz
acpicpu0: P7: FFH, lat 10 us, pow 48514 mW, 2500 MHz
acpicpu0: P8: FFH, lat 10 us, pow 43822 mW, 2300 MHz
acpicpu0: P9: FFH, lat 10 us, pow 40960 mW, 2200 MHz
acpicpu0: P10: FFH, lat 10 us, pow 38735 mW, 2100 MHz
acpicpu0: P11: FFH, lat 10 us, pow 36562 mW, 2000 MHz
acpicpu0: P12: FFH, lat 10 us, pow 34426 mW, 1900 MHz
acpicpu0: P13: FFH, lat 10 us, pow 32333 mW, 1800 MHz
acpicpu0: P14: FFH, lat 10 us, pow 29734 mW, 1700 MHz
acpicpu0: P15: FFH, lat 10 us, pow 27735 mW, 1600 MHz
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=103
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=103
acpicpu2 at cpu2: ACPI CPU
coretemp2 at cpu2: thermal sensor, 1 C resolution, Tjmax=103
acpicpu3 at cpu3: ACPI CPU
coretemp3 at cpu3: thermal sensor, 1 C resolution, Tjmax=103
acpicpu4 at cpu4: ACPI CPU
acpicpu5 at cpu5: ACPI CPU
acpicpu6 at cpu6: ACPI CPU
acpicpu7 at cpu7: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 3092973000 Hz quality 3000
uhub0 at usb1: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 3.00/1.00, addr 0
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb2: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 0
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb0: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
IPsec: Initialized Security Association Processing.
uhub3 at usb3: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ahcisata0 port 1: device present, speed: 6.0Gb/s
ahcisata0 port 0: device present, speed: 6.0Gb/s
uhub4 at uhub2 port 1: vendor 8087 (0x8087) product 0024 (0x0024), class 9/0, rev 2.00/0.00, addr 2
uhub4: single transaction translator
uhub4: 4 ports with 4 removable, self powered
uhub5 at uhub3 port 1: vendor 8087 (0x8087) product 0024 (0x0024), class 9/0, rev 2.00/0.00, addr 2
uhub5: single transaction translator
uhub5: 6 ports with 6 removable, self powered
wd0 at atabus0 drive 0
wd0: <WDC WD30EFAX-68JH4N0>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 2794 GB, 5814021 cyl, 16 head, 63 sec, 512 bytes/sect x 5860533168 sectors (4096 bytes/physsect)
wd0: GPT GUID: 9afde49f-5a5a-4ff9-9b84-a0b3bf6b31a5
autoconfiguration error: wd0: bad GPT partition array CRC
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), NCQ (32 tags) w/PRIO
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags) w/PRIO
wd1 at atabus1 drive 0
wd1: <WDC WD30EFAX-68JH4N0>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 2794 GB, 5814021 cyl, 16 head, 63 sec, 512 bytes/sect x 5860533168 sectors (4096 bytes/physsect)
wd1: GPT GUID: ff612cf1-e95e-4fcd-81c7-d220b47dcbc4
autoconfiguration error: wd1: bad GPT partition array CRC
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), NCQ (32 tags) w/PRIO
wd1(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags) w/PRIO
umass0 at uhub5 port 5 configuration 1 interface 0
umass0: SABRENT (0x174c) SSHD (0x55aa), rev 2.10/1.00, addr 3
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <SABRENT, SSHD, 0> disk fixed
sd0: 465 GB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors (4096 bytes/physsect)
sd0: GPT GUID: 0e177eef-182d-4731-9cd4-9358fc646135
dk0 at sd0: "EFI system", 262144 blocks at 2048, type: msdos
dk1 at sd0: "NetBSD root", 976506891 blocks at 266240, type: ffs
swwdog0: software watchdog initialized
WARNING: 3 errors while detecting hardware; check system log.
boot device: sd0
root on dk1
root file system type: ffs
kern.module.path=/stand/amd64/11.0/modules
nvmm0: attached, using backend x86-vmx
ZFS filesystem version: 5
tap0: Ethernet address [_MAC_XXXXXXXXXX]
tap1: Ethernet address [_MAC_XXXXXXXXXX]
tap2: Ethernet address [_MAC_XXXXXXXXXX]
tap3: Ethernet address [_MAC_XXXXXXXXXX]
wsdisplay0: screen 4 added (default, vt100 emulation)