Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2025-12-30 15:38:34
From: jmcneill
Description: NetBSD/evbppc 11.99.4 on Nintendo Wii U (SMP)
[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, [ 1.000000] 2024, 2025 [ 1.000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.000000] The Regents of the University of California. All rights reserved. [ 1.000000] NetBSD 11.99.4 (GENERIC.MP) #78: Tue Dec 30 11:33:44 AST 2025 [ 1.000000] jmcneill@berserk:/home/jmcneill/netbsd/git-obj/sys/arch/nintendoppc/compile/GENERIC.MP [ 1.000000] total memory = 2083 MB [ 1.000000] oea_startup: failed to allocate DEAD ZONE: error=12 [ 1.000000] avail memory = 1736 MB [ 1.000000] timecounter: Timecounters tick every 10.000 msec [ 1.000000] mainbus0 (root): Nintendo Wii U [ 1.000000] cpu0 at mainbus0: Espresso (Revision 2.1), ID 0 (primary) [ 1.000000] cpu0: HID0 0x8051c0a4<EMCP,NAP,DPM,NHR,ICE,DCE,SGE,BTIC,BHT>, powersave: 1 [ 1.000000] cpu0: 1243.12 MHz, 512KB WB L2 cache [ 1.000000] cpu1 at mainbus0: Espresso (Revision 2.1), ID 1 [ 1.000000] cpu1: HID0 0x8051c0a4<EMCP,NAP,DPM,NHR,ICE,DCE,SGE,BTIC,BHT>, powersave: 1 [ 1.000000] cpu1: 1243.12 MHz, 512KB WB with ECC L2 cache [ 1.000000] cpu2 at mainbus0: Espresso (Revision 2.1), ID 2 [ 1.000000] cpu2: HID0 0x8051c0a4<EMCP,NAP,DPM,NHR,ICE,DCE,SGE,BTIC,BHT>, powersave: 1 [ 1.000000] cpu2: 1243.12 MHz, 512KB WB with ECC L2 cache [ 1.000000] exi0 at mainbus0 addr 0x0d006800 irq 4: External Interface [ 1.000000] exi device ID 0xffff0000 at exi0 channel 0 device 1 not configured [ 1.000000] genfb0 at mainbus0 addr 0x0c002000 irq 8: Wii U TV framebuffer (1280x720 32-bpp @ 0x17500000) [ 1.000000] genfb0: framebuffer at 0x17500000, size 1280x720, depth 32, stride 5120 [ 1.000000] wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation) [ 1.000000] wsmux1: connecting to wsdisplay0 [ 1.000000] wsdisplay0: screen 1-3 added (default, vt100 emulation) [ 1.000000] ahb0 at mainbus0 irq 14: Latte 0x70 [ 1.000000] ahcisata0 at ahb0 addr 0x0d160400 irq 38: AHCI SATA controller [ 1.000000] ahcisata0: ignoring broken port multiplier support [ 1.000000] ahcisata0: AHCI revision 1.20, 2 ports, 32 slots, CAP 0x7720ff81<CCCS,PSC,SSC,PMD,ISS=0x2=Gen2,SCLO,SAL,SALP,SMPS,SSNTF,SNCQ> [ 1.000000] atabus0 at ahcisata0 channel 0 [ 1.000000] ohci0 at ahb0 addr 0x0d050000 irq 5: OHCI [ 1.000000] ohci0: OHCI version 1.0, legacy support [ 1.000000] usb0 at ohci0: USB revision 1.0 [ 1.000000] ohci1 at ahb0 addr 0x0d060000 irq 6: OHCI [ 1.000000] ohci1: OHCI version 1.0, legacy support [ 1.000000] usb1 at ohci1: USB revision 1.0 [ 1.000000] ohci2 at ahb0 addr 0x0d130000 irq 35: OHCI [ 1.000000] ohci2: OHCI version 1.0, legacy support [ 1.000000] usb2 at ohci2: USB revision 1.0 [ 1.000000] ohci3 at ahb0 addr 0x0d150000 irq 37: OHCI [ 1.000000] ohci3: OHCI version 1.0, legacy support [ 1.000000] usb3 at ohci3: USB revision 1.0 [ 1.000000] ehci0 at ahb0 addr 0x0d040000 irq 4: EHCI [ 1.000000] ehci0: EHCI version 1.0 [ 1.000000] ehci0: 2 companion controllers, 4 ports each [ 1.000000] usb4 at ehci0: USB revision 2.0 [ 1.000000] ehci1 at ahb0 addr 0x0d120000 irq 34: EHCI [ 1.000000] ehci1: EHCI version 1.0 [ 1.000000] ehci1: 1 companion controller, 2 ports [ 1.000000] usb5 at ehci1: USB revision 2.0 [ 1.000000] ehci2 at ahb0 addr 0x0d140000 irq 36: EHCI [ 1.000000] ehci2: EHCI version 1.0 [ 1.000000] ehci2: 1 companion controller, 2 ports [ 1.000000] usb6 at ehci2: USB revision 2.0 [ 1.000000] sdhc0 at ahb0 addr 0x0d070000 irq 7: SDHC [ 1.000000] sdhc0: SDHC 1.0, rev 0, caps <01e130b0/00000000>, SDMA, 48000 kHz, HS 3.3V, 1024 byte blocks [ 1.000000] sdmmc0 at sdhc0 slot 0 [ 1.000000] sdhc1 at ahb0 addr 0x0d080000 irq 8: SDHC [ 1.000000] sdhc1: SDHC 1.0, rev 0, caps <01e130b0/00000000>, PIO, 48000 kHz, HS 3.3V, 1024 byte blocks [ 1.000000] sdmmc1 at sdhc1 slot 0 [ 1.000000] hwaes0 at ahb0 addr 0x0d020000 irq 2: AES engine [ 1.000000] bwai0 at mainbus0 addr 0x0d006c00 irq 5: Audio Interface [ 1.000000] bwdsp0 at mainbus0 addr 0x0c280000: DSP [ 1.000000] audio0 at bwdsp0: playback [ 1.000000] audio0: slinear_be:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback [ 1.000000] spkr0 at audio0: PC Speaker (synthesized) [ 1.000000] wsbell at spkr0 not configured [ 1.000000] vmmask 7fe0000 schedmask fff0000 highmask 7fff0000 [ 1.000000] WARNING: system needs entropy for security; see entropy(7) [ 1.000000] timecounter: Timecounter "mftb" frequency 62156250 Hz quality 100 [ 1.000022] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 [ 1.159996] cpu2 started [ 1.170017] cpu1 started [ 1.179992] uhub0 at usb0: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.179992] uhub0: 4 ports with 4 removable, self powered [ 1.179992] uhub1 at usb1: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.210020] uhub1: 2 ports with 2 removable, self powered [ 1.210020] uhub2 at usb2: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.210020] uhub2: 2 ports with 2 removable, self powered [ 1.210020] uhub3 at usb3: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.230012] uhub3: 2 ports with 2 removable, self powered [ 1.230012] uhub4 at usb4: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1 [ 1.230012] uhub4: 6 ports with 6 removable, self powered [ 1.230012] uhub5 at usb5: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1 [ 1.259993] uhub5: 2 ports with 2 removable, self powered [ 1.259993] uhub6 at usb6: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1 [ 1.269999] uhub6: 2 ports with 2 removable, self powered [ 1.269999] IPsec: Initialized Security Association Processing. [ 1.309991] ahcisata0 port 0: device present, speed: 1.5Gb/s [ 1.319996] sdmmc1: 4-bit width, 48.000 MHz [ 1.339994] bwfm0 at sdmmc1 function 1 [ 1.349993] (manufacturer 0x2d0, product 0xa962) at sdmmc1 function 2 not configured [ 1.369991] sdmmc0: SD card status: 4-bit, C10, U3, V30, A2, Cache, Host/Card self-maintenance [ 1.379992] sdmmc0: cache enabled [ 1.389992] ld0 at sdmmc0: <0x1b:0x534d:FE4S9:0x30:0x4dad5ecd:0x186> [ 1.399994] ld0: 238 GB, 31166 cyl, 255 head, 63 sec, 512 bytes/sect x 500695040 sectors [ 1.420002] ld0: 4-bit width, High-Speed/SDR25, Cache, 48.000 MHz [ 1.839991] ehci0: handing over full speed device on port 1 to companion controller [ 2.349992] uhidev0 at uhub6 port 1 configuration 1 interface 0 [ 2.359994] uhidev0: vendor 057e (0x057e) product 0341 (0x0341), rev 2.00/0.00, addr 2, iclass 3/0 [ 2.379994] uhid0 at uhidev0: input=128, output=0, feature=0 [ 2.389994] uhidev1 at uhub6 port 1 configuration 1 interface 1 [ 2.399996] uhidev1: vendor 057e (0x057e) product 0341 (0x0341), rev 2.00/0.00, addr 2, iclass 3/0 [ 2.409993] uhid1 at uhidev1: input=128, output=0, feature=0 [ 2.419994] uaudio0 at uhub6 port 1 configuration 1 interface 2 [ 2.439994] uaudio0: vendor 057e (0x057e) product 0341 (0x0341), rev 2.00/0.00, addr 2 [ 2.449994] uaudio0: audio rev 1.00 [ 2.459994] audio1 at uaudio0: capture [ 2.469994] audio1: slinear_be:16 <- slinear_le:16 1ch 16000Hz, blk 61440 bytes (1920ms) for recording [ 2.479995] uaudio1 at uhub6 port 1 configuration 1 interface 4 [ 2.499995] uaudio1: vendor 057e (0x057e) product 0341 (0x0341), rev 2.00/0.00, addr 2 [ 2.509994] uaudio1: autoconfiguration error: alt 0 missing AS interface(s) [ 2.519993] umodem0 at uhub6 port 1 configuration 1 interface 6 [ 2.529995] umodem0: vendor 057e (0x057e) product 0341 (0x0341), rev 2.00/0.00, addr 2, iclass 2/2 [ 2.539994] umodem0: data interface 1, has CM over data, has no break [ 2.559994] umodem0: autoconfiguration error: no data interface [ 2.569994] uvideo0 at uhub6 port 1 configuration 1 interface 8: vendor 057e (0x057e) product 0341 (0x0341), rev 2.00/0.00, addr 2 [ 2.579994] video0 at uvideo0: vendor 057e (0x057e) product 0341 (0x0341), rev 2.00/0.00, addr 2 [ 2.589994] video1 at uvideo0: vendor 057e (0x057e) product 0341 (0x0341), rev 2.00/0.00, addr 2 [ 2.599996] uvideo1 at uhub6 port 1 configuration 1 interface 10: vendor 057e (0x057e) product 0341 (0x0341), rev 2.00/0.00, addr 2 [ 2.619994] video2 at uvideo1: vendor 057e (0x057e) product 0341 (0x0341), rev 2.00/0.00, addr 2 [ 2.629994] video3 at uvideo1: vendor 057e (0x057e) product 0341 (0x0341), rev 2.00/0.00, addr 2 [ 2.839992] atapibus0 at atabus0: 1 targets [ 2.860001] cd0 at atapibus0 drive 0: <, , > cdrom removable [ 2.860001] cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) [ 2.860001] cd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) (using DMA) [ 3.059992] axe0 at uhub4 port 2 [ 3.069994] axe0: vendor 0b95 (0x0b95) product 7720 (0x7720), rev 2.00/0.01, addr 2 [ 3.549993] ukphy0 at axe0 phy 16: OUI 0x007063, model 0x0001, rev. 1 [ 3.559994] ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [ 3.569994] axe0: Ethernet address [_MAC_XXXXXXXXXX] [ 3.829993] uhidev2 at uhub0 port 1 configuration 1 interface 0 [ 3.849995] uhidev2: Logitech (0x046d) USB Receiver (0xc52b), rev 2.00/24.11, addr 2, iclass 3/1 [ 3.859994] ukbd0 at uhidev2 [ 3.879994] wskbd0 at ukbd0: console keyboard, using wsdisplay0 [ 3.889994] uhidev3 at uhub0 port 1 configuration 1 interface 1 [ 3.899996] uhidev3: Logitech (0x046d) USB Receiver (0xc52b), rev 2.00/24.11, addr 2, iclass 3/1 [ 3.919993] uhidev3: 8 report ids [ 3.929994] ums0 at uhidev3 reportid 2: 16 buttons, W and Z dirs [ 3.939995] wsmouse0 at ums0 mux 0 [ 3.949994] uhid2 at uhidev3 reportid 3: input=4, output=0, feature=0 [ 3.969994] uhid3 at uhidev3 reportid 4: input=1, output=0, feature=0 [ 3.979994] uhid4 at uhidev3 reportid 8: input=1, output=0, feature=0 [ 3.989994] uhidev4 at uhub0 port 1 configuration 1 interface 2 [ 3.999995] uhidev4: Logitech (0x046d) USB Receiver (0xc52b), rev 2.00/24.11, addr 2, iclass 3/0 [ 4.019993] uhidev4: 33 report ids [ 4.029994] uhid5 at uhidev4 reportid 16: input=6, output=6, feature=0 [ 4.039995] uhid6 at uhidev4 reportid 17: input=19, output=19, feature=0 [ 4.059993] uhid7 at uhidev4 reportid 32: input=14, output=14, feature=0 [ 4.069994] uhid8 at uhidev4 reportid 33: input=31, output=31, feature=0 [ 4.179993] ehci0: handing over full speed device on port 3 to companion controller [ 4.239993] WARNING: 2 errors while detecting hardware; check system log. [ 4.239993] boot device: <unknown> [ 4.239993] root on ld0a dumps on ld0b [ 4.290011] root file system type: ffs [ 4.290011] kern.module.path=/stand/nintendoppc/11.99.4/modules [ 4.290011] bwfm0: chip 0x0000a962 rev 1 [ 4.290011] bwfm0: Firmware file default: brcmfmac43362-sdio.bin [ 4.290011] WARNING: no TOD clock present [ 4.290011] WARNING: using filesystem time [ 4.341687] WARNING: CHECK AND RESET THE DATE! [ 4.341687] bwfm0: Found Firmware file: brcmfmac43362-sdio.bin [ 4.360013] bwfm0: NVRAM file default: brcmfmac43362-sdio.txt [ 4.369994] bwfm0: Found NVRAM file: brcmfmac43362-sdio.txt [ 4.369994] bwfm0: CLM file default: brcmfmac43362-sdio.clm_blob [ 5.269995] ubt0 at uhub1 port 1 [ 5.269995] ubt0: Broadcom Corp (0x057e) BCM20702A0 (0x0305), rev 2.00/1.00, addr 2 [ 5.699994] bwfm0: CHIPACTIVE [ 5.799995] bwfm0: address [_MAC_XXXXXXXXXX] [ 5.819997] bwfm0: wl0: Apr 22 2013 14:50:00 version[_IP_XXXXXX].6 FWID 01-b30a427d [ 6.089997] entropy: best effort [ 9.140019] wsdisplay0: screen 4 added (default, vt100 emulation) [ 10.600036] bthub0 at ubt0 local-bdaddr [_MAC_XXXXXXXXXX]