Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2026-01-25 00:00:16
From: uwe
Description: Dell Inspiron 1525
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
2024, 2025, 2026
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 11.99.5 (GENERIC) #0: Sun Jan 25 02:38:33 MSK 2026
uwe@majava:/home/uwe/work/netbsd/cvs/src/sys/arch/i386/compile/GENERIC
total memory = 3062 MB
avail memory = 2981 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
mainbus0 (root)
ACPI: RSDP 0x00000000000FBC60 000024 (v02 DELL )
ACPI: XSDT 0x00000000BF66F200 000064 (v01 DELL M08 27D90A1B ASL 00000061)
ACPI: FACP 0x00000000BF66F09C 0000F4 (v04 DELL M08 27D90A1B ASL 00000061)
ACPI: DSDT 0x00000000BF66F800 005477 (v02 INT430 SYSFexxx 00001001 INTL 20050624)
ACPI: FACS 0x00000000BF67E000 000040
ACPI: HPET 0x00000000BF66F300 000038 (v01 DELL M08 00000001 ASL 00000061)
ACPI: APIC 0x00000000BF66F400 000068 (v01 DELL M08 27D90A1B ASL 00000047)
ACPI: MCFG 0x00000000BF66F3C0 00003E (v16 DELL M08 27D90A1B ASL 00000061)
ACPI: SLIC 0x00000000BF66F49C 000176 (v01 DELL M08 27D90A1B ASL 00000061)
ACPI: OSFR 0x00000000BF66EA00 00008A (v01 DELL M08 27D90A1B ASL 00000061)
ACPI: BOOT 0x00000000BF66EFC0 000028 (v01 DELL M08 27D90A1B ASL 00000061)
ACPI: SSDT 0x00000000BF66DA44 0004CC (v01 PmRef CpuPm 00003000 INTL 20050624)
ACPI: 2 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0
cpu0: Use lfence to serialize rdtsc
cpu0: Intel(R) Core(TM)2 Duo CPU T5550 @ 1.83GHz, id 0x6fd
cpu0: node 0, package 0, core 0, smt 0
cpu1 at mainbus0 apid 1
cpu1: Intel(R) Core(TM)2 Duo CPU T5550 @ 1.83GHz, id 0x6fd
cpu1: node 0, package 0, core 1, smt 0
acpi0 at mainbus0: Intel ACPICA 20251212
acpi0: X/RSDT: OemId <DELL , M08 ,27d90a1b>, AslId <ASL ,00000061>
acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f8000000
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0x00000000C5214A04 000202 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0x00000000C55FA004 0005E5 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0x00000000C5331404 0000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0x00000000C55E6704 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
pckbc1 at acpi0 (PS2M, PNP0F13) (aux port): irq 12
pckbc2 at acpi0 (KBC, PNP0303) (kbd port): io 0x60,0x64,0x62,0x66 irq 1
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 2
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61,0x63,0x65,0x67
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
MB4 (PNP0C01) at acpi0 not configured
COPR (PNP0C04) at acpi0 not configured
acpivga0 at acpi0 (VID): ACPI Display Adapter
acpiout0 at acpivga0 (TV, 0x0200): ACPI Display Output Device
acpiout1 at acpivga0 (CRT, 0x0100): ACPI Display Output Device
acpiout2 at acpivga0 (LCD, 0x0400): ACPI Display Output Device
acpiout2: brightness levels: [12,24,36,48,60,72,84,100]
acpiout3 at acpivga0 (DVI, 0x0300): ACPI Display Output Device
acpivga0: connected output devices:
acpivga0: 0x0100 (acpiout1): Ext. Monitor, head 0, bios detect
acpivga0: 0x0200 (acpiout0): TV, head 0, bios detect
acpivga0: 0x0400 (acpiout2): Unknown Output Device, head 0, bios detect
acpivga0: 0x0300 (acpiout3): Unknown Output Device, head 0, bios detect
acpivga1 at acpi0 (VID2): ACPI Display Adapter
acpivga1: autoconfiguration error: failed to evaluate \_SB_.PCI0.VID2._DOD: AE_BAD_DATA
MB2 (PNP0C01) at acpi0 not configured
MB3 (PNP0C01) at acpi0 not configured
MB1 (PNP0C01) at acpi0 not configured
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PBTN, PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (SBTN, PNP0C0E): ACPI Sleep Button
acpiacad0 at acpi0 (AC, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery
acpidalb0 at acpi0 (MBTN, PNP0C32-0): Direct Application Launch Button
acpiwmi0 at acpi0 (AMW0, PNP0C14-0): ACPI WMI Interface
wmidell0 at acpiwmi0: Dell WMI mappings version 1
acpitz0 at acpi0 (THM)
acpitz0: levels: critical 91.0 C, passive cooling
apm0 at acpi0: Power Management spec V1.2
ACPI: Enabled 4 GPEs in block 00 to 1F
pckbd0 at pckbc2 (kbd slot)
pckbc2: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc2 (aux slot)
pms0: ALPS PS/2 V2 pointing device
pckbc2: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: Intel 82965PM Host Bridge (rev. 0x0c)
agp0 at pchb0: i965-family chipset
agp0: detected 7676k stolen memory
agp0: aperture at 0xe0000000, size 0x20000000
i915drmkms0 at pci0 dev 2 function 0: Intel 82965PM Integrated Graphics Device (rev. 0x0c)
Intel 82965PM Integrated Graphics Device (miscellaneous display, revision 0x0c) at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 26 function 0: Intel 82801H USB UHCI Controller (rev. 0x02)
uhci0: interrupting at ioapic0 pin 20
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 26 function 1: Intel 82801H USB UHCI Controller (rev. 0x02)
uhci1: interrupting at ioapic0 pin 21
usb1 at uhci1: USB revision 1.0
ehci0 at pci0 dev 26 function 7: Intel 82801H USB EHCI Controller (rev. 0x02)
ehci0: 64-bit DMA - limited
ehci0: interrupting at ioapic0 pin 22
ehci0: EHCI version 1.0
ehci0: 2 companion controllers, 2 ports each: uhci0 uhci1
ehci0: Using DMA subregion for control data structures
usb2 at ehci0: USB revision 2.0
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at msi0 vec 0
hdaudio0: HDA ver. 1.0, OSS 4, ISS 4, BSS 0, SDO 1, 64-bit
hdvsmfg at hdaudio0 not configured
hdafg0 at hdaudio0: vendor 1095 product 1392
hdafg0: HDMI00 8ch: Digital Out [Jack]
hdafg0: 8ch/0ch 48000Hz PCM16*
audio0 at hdafg0: playback, capture, full duplex, independent
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
hdafg1 at hdaudio0: Sigmatel STAC9228X
hdafg1: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
hdafg1: ADC01 2ch: Mic In [Jack] [Built-In]
hdafg1: DAC02 2ch: Speaker [Jack]
hdafg1: DIG03 2ch: Digital Out [Built-In]
hdafg1: 2ch/2ch 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio1 at hdafg1: playback, capture, full duplex, independent
audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
ppb0 at pci0 dev 28 function 0: Intel 82801H PCI Express Port #1 (rev. 0x02)
ppb0: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci1 at ppb0 bus 9
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
mskc0 at pci1 dev 0 function 0, Yukon-2 FE+ rev. A0 (0x0)
mskc0: interrupting at msi1 vec 0
msk0 at mskc0 port A: Ethernet address [_MAC_XXXXXXXXXX]
makphy0 at msk0 phy 0: Marvell 88E3016 10/100 Fast Ethernet PHY, rev. 0
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ppb1 at pci0 dev 28 function 1: Intel 82801H PCI Express Port #2 (rev. 0x02)
ppb1: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci2 at ppb1 bus 11
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
Broadcom BCM4315 2.4GHz (miscellaneous network, revision 0x01) at pci2 dev 0 function 0 not configured
ppb2 at pci0 dev 28 function 4: Intel 82801H PCI Express Port #5 (rev. 0x02)
ppb2: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci3 at ppb2 bus 12
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
uhci2 at pci0 dev 29 function 0: Intel 82801H USB UHCI Controller (rev. 0x02)
uhci2: interrupting at ioapic0 pin 20
usb3 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 1: Intel 82801H USB UHCI Controller (rev. 0x02)
uhci3: interrupting at ioapic0 pin 21
usb4 at uhci3: USB revision 1.0
uhci4 at pci0 dev 29 function 2: Intel 82801H USB UHCI Controller (rev. 0x02)
uhci4: interrupting at ioapic0 pin 22
usb5 at uhci4: USB revision 1.0
ehci1 at pci0 dev 29 function 7: Intel 82801H USB EHCI Controller (rev. 0x02)
ehci1: 64-bit DMA - limited
ehci1: interrupting at ioapic0 pin 20
ehci1: EHCI version 1.0
ehci1: 3 companion controllers, 2 ports each: uhci2 uhci3 uhci4
ehci1: Using DMA subregion for control data structures
usb6 at ehci1: USB revision 2.0
ppb3 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0xf2)
pci4 at ppb3 bus 2
pci4: i/o space, memory space enabled
fwohci0 at pci4 dev 9 function 0: Ricoh 5C832 PCI-SD/MMC/MMC+/MS/xD/Firewire (rev. 0x05)
fwohci0: interrupting at ioapic0 pin 16
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 [_MAC_XXXXXXXXXX]:51:a1
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
fwohci0: Clear PME# now
sdhc0 at pci4 dev 9 function 1: Ricoh 5C822 PCI-CardBus Bridge/MS/SD/MMC/SC (rev. 0x22)
sdhc0: interrupting at ioapic0 pin 18
sdhc0: SDHC 1.0, rev 4, caps <01e021a1/00000000>, SDMA, 33000 kHz, HS 3.3V, 512 byte blocks
sdmmc0 at sdhc0 slot 0
Ricoh 5C843 PCI-CardBus Bridge/SD/MMC/MMC+/MS/xD/Firewire (miscellaneous system, revision 0x12) at pci4 dev 9 function 2 not configured
Ricoh 5C592 PCI-CardBus Bridge/MS/SD/Firewire (miscellaneous system, revision 0x12) at pci4 dev 9 function 3 not configured
Ricoh xD-Picture Card Controller (miscellaneous system, revision 0x12) at pci4 dev 9 function 4 not configured
ichlpcib0 at pci0 dev 31 function 0: Intel 82801HBM LPC Interface Bridge (rev. 0x02)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
tco0 at ichlpcib0: TCO (watchdog) timer configured.
tco0: Min/Max interval 1/367 seconds
piixide0 at pci0 dev 31 function 1: Intel 82801HBM IDE Controller (ICH8M) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel ignored (disabled)
ahcisata0 at pci0 dev 31 function 2: Intel 82801HBM AHCI SATA Controller (rev. 0x02)
ahcisata0: AHCI revision 1.10, 3 ports, 32 slots, CAP 0xe720ffc2<EMS,CCCS,PSC,SSC,PMD,ISS=0x2=Gen2,SCLO,SAL,SALP,SSNTF,SNCQ,S64A>
ahcisata0: interrupting at msi2 vec 0
atabus1 at ahcisata0 channel 0
atabus2 at ahcisata0 channel 2
ichsmb0 at pci0 dev 31 function 3: Intel 82801H SMBus Controller (rev. 0x02)
ichsmb0: interrupting at ioapic0 pin 17
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: C2: FFH, lat 1 us, pow 500 mW
acpicpu0: C3: FFH, lat 57 us, pow 100 mW, bus master check
acpicpu0: P0: FFH, lat 10 us, pow 31000 mW, 1833 MHz
acpicpu0: P1: FFH, lat 10 us, pow 20000 mW, 1333 MHz
acpicpu0: P2: FFH, lat 10 us, pow 13000 mW, 1000 MHz
acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 %
acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 %
acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 %
acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 %
acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 %
acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 %
acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 %
acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 %
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=85
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=85
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
ieee1394if0: bus manager 0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
acpiacad0: AC adapter online.
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <Optiarc DVD+/-RW AD-5560A, CN0FU0426886583O03OW, DD12> cdrom removable
cd0: 32-bit data port
uhub0 at usb0: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
uhub3 at usb3: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhub5 at usb5: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
uhub6 at usb6: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
uhub6: 6 ports with 6 removable, self powered
IPsec: Initialized Security Association Processing.
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
ahcisata0 port 0: device present, speed: 1.5Gb/s
uvideo0 at uhub2 port 1 configuration 1 interface 0: OmniVision Technologies, Inc. -2640-07.07.20.3 (0x05a9) Laptop Integrated Webcam (0x2640), rev 2.00/1.00, addr 2
video0 at uvideo0: OmniVision Technologies, Inc. -2640-07.07.20.3 (0x05a9) Laptop Integrated Webcam (0x2640), rev 2.00/1.00, addr 2
ahcisata0 port 2: PHY offline
wd0 at atabus1 drive 0
wd0: <WDC WD2500BEVS-22UST0>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
swwdog0: software watchdog initialized
WARNING: 1 error while detecting hardware; check system log.
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/i386/11.99.5/modules
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
i915drmkms0: interrupting at ioapic0 pin 16 (i915drmkms0)
[drm] Initialized overlay support.
[drm] Initialized i915 1.6.0 20200114 for i915drmkms0 on minor 0
intelfb0 at i915drmkms0
[drm] DRM_I915_DEBUG enabled
[drm] DRM_I915_DEBUG_GEM enabled
intelfb0: framebuffer at 0xe0020000, size 1280x800, depth 32, stride 5120
wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)