Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2026-05-15 04:18:39
From: iMil
Description: Amlogic s905x4 sc2 (sc2_s905x4_ah212)
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, [ 1.0000000] 2024, 2025, 2026 [ 1.0000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 11.99.6 (S905X) #23: Thu May 14 12:16:51 CEST 2026 [ 1.0000000] imil@tatooine:/home/imil/src/github.com/NetBSD-src/obj-aarch64/sys/arch/evbarm/compile/S905X [ 1.0000000] total memory = 1968 MB [ 1.0000000] avail memory = 1895 MB [ 1.0000000] armfdt0 (root) [ 1.0000000] simplebus0 at armfdt0: Amlogic SC2 AH212 Development Board 1000M [ 1.0000000] simplebus1 at simplebus0 [ 1.0000000] cpus0 at simplebus0 [ 1.0000000] psci0 at simplebus0: PSCI 1.0 [ 1.0000000] simplebus2 at simplebus0 [ 1.0000000] cpu0 at cpus0: Arm Cortex-A55 r2p0 (v8.2-A+), id 0x0 [ 1.0000000] cpu0: package 0, core 0, smt 0, numa 0 [ 1.0000000] cpu1 at cpus0: Arm Cortex-A55 r2p0 (v8.2-A+), id 0x100 [ 1.0000000] cpu1: package 0, core 1, smt 0, numa 0 [ 1.0000000] cpu2 at cpus0: Arm Cortex-A55 r2p0 (v8.2-A+), id 0x200 [ 1.0000000] cpu2: package 0, core 2, smt 0, numa 0 [ 1.0000000] cpu3 at cpus0: Arm Cortex-A55 r2p0 (v8.2-A+), id 0x300 [ 1.0000000] cpu3: package 0, core 3, smt 0, numa 0 [ 1.0000000] simplebus3 at simplebus1 [ 1.0000000] simplebus4 at simplebus3 [ 1.0000000] gic0 at simplebus1: GIC [ 1.0000000] armgic0 at gic0: Generic Interrupt Controller, 288 sources (270 valid) [ 1.0000000] armgic0: 16 Priorities, 256 SPIs, 6 PPIs, 8 SGIs [ 1.0000000] fclock0 at simplebus0: 24000000 Hz fixed clock (xtal) [ 1.0000000] syscon0 at simplebus3: System Controller Registers [ 1.0000000] fclock1 at simplebus0: 250000000 Hz fixed clock (stmmaceth) [ 1.0000000] fclock2 at simplebus0: 125000000 Hz fixed clock (clkin0) [ 1.0000000] fclock3 at simplebus0: 125000000 Hz fixed clock (clkin1) [ 1.0000000] mesonresets0 at simplebus3 [ 1.0000000] gtmr0 at simplebus0: Generic Timer [ 1.0000000] gtmr0: interrupting on GIC irq 27 [ 1.0000000] armgtmr0 at gtmr0: Generic Timer (24000 kHz, virtual) [ 1.0000040] fregulator0 at simplebus0: VDDAO_3V3 [ 1.0000040] fregulator1 at simplebus0: VDDIO_AO1V8 [ 1.0000040] fregulator2 at simplebus0: 12V [ 1.0000040] mesonuart0 at simplebus3: console [ 1.0000040] mesonuart0: interrupting on GIC irq 201 [ 1.0000040] mmcpwrseq0 at simplebus0: couldn't acquire ext_clock [ 1.0000040] mesong12u2phy0 at simplebus3: USB2 PHY [ 1.0000040] mesong12u2phy1 at simplebus3: USB2 PHY [ 1.0000040] mesong12u3pphy0 at simplebus3: couldn't get clock [ 1.0000040] /soc/bus@fe000000/clock-controller@8000 at simplebus3 not configured [ 1.0000040] /soc/bus@fe000000/pinctrl@4000 at simplebus3 not configured [ 1.0000040] /soc/bus@fe000000/clock-controller@0 at simplebus3 not configured [ 1.0000040] awge0 at simplebus1: Gigabit Ethernet Controller [ 1.0000040] awge0: interrupting on GIC irq 106 [ 1.0000040] awge0: PHY reset failed [ 1.0000040] awge0: Core version: 00000037 [ 1.0000040] awge0: Ethernet address [_MAC_XXXXXXXXXX] [ 1.0000040] awge0: HW feature mask: 500d4f37 [ 1.0000040] awge0: no PHY found! [ 1.0000040] /soc/vpu@ff000000 at simplebus1 not configured [ 1.0000040] dispcon0 at simplebus0: HDMI connector [ 1.0000040] /secure-monitor at simplebus0 not configured [ 1.0000040] /opp-table-gpu at simplebus0 not configured [ 1.0000040] /soc/bus@fe000000/bus@36000/video-lut@48 at simplebus4 not configured [ 1.0000040] /cvbs-connector at simplebus0 not configured [ 1.0000040] /soc/bus@fe000000/hdmi-tx@300000 at simplebus3 not configured [ 1.0000040] /soc/bus@fe000000/temperature-sensor@20000 at simplebus3 not configured [ 1.0000040] /soc/bus@fe000000/temperature-sensor@22000 at simplebus3 not configured [ 1.0000040] /soc/bus@fe000000/pwm@5c000 at simplebus3 not configured [ 1.0000040] /sdio-32k at simplebus0 not configured [ 1.0000040] /opp_table at simplebus0 not configured [ 1.0000040] mesongxmmc0 at simplebus1: couldn't get clocks [ 1.0000040] mesongxmmc1 at simplebus1: couldn't get clocks [ 1.0000040] mesongxmmc2 at simplebus1: couldn't get clocks [ 1.0000040] mesonusbctrl0 at simplebus1: USB Controllers [ 1.0000040] /soc/gpu@fe400000 at simplebus1 not configured [ 1.0000040] mesongxwdt0 at simplebus3: EE-watchdog [ 1.0000040] /soc/bus@fe000000/interrupt-controller@4080 at simplebus3 not configured [ 1.0000040] /soc/bus@fe000000/mdio-multiplexer@28000 at simplebus3 not configured [ 1.0000040] /soc/bus@fe000000/serial@78000 at simplebus3 not configured [ 1.0000040] /soc/bus@fe000000/rng@440788 at simplebus3 not configured [ 1.0000040] dwctwo0 at simplebus1: mode 'peripheral' not supported [ 1.0000040] xhci0 at simplebus1: DesignWare USB3 XHCI (rev. 3.20a) [ 1.0000040] xhci0: interrupting on GIC irq 162 [ 1.0000040] usb0 at xhci0: USB revision 3.0 [ 1.0000040] usb1 at xhci0: USB revision 2.0 [ 1.0000040] /soc/bus@fe000000/clock-controller@8000 at simplebus3 not configured [ 1.0000040] /soc/bus@fe000000/pinctrl@4000 at simplebus3 not configured [ 1.0000040] /soc/bus@fe000000/clock-controller@0 at simplebus3 not configured [ 1.0000040] /soc/vpu@ff000000 at simplebus1 not configured [ 1.0000040] /secure-monitor at simplebus0 not configured [ 1.0000040] /opp-table-gpu at simplebus0 not configured [ 1.0000040] /soc/bus@fe000000/bus@36000/video-lut@48 at simplebus4 not configured [ 1.0000040] /cvbs-connector at simplebus0 not configured [ 1.0000040] /soc/bus@fe000000/hdmi-tx@300000 at simplebus3 not configured [ 1.0000040] /soc/bus@fe000000/temperature-sensor@20000 at simplebus3 not configured [ 1.0000040] /soc/bus@fe000000/temperature-sensor@22000 at simplebus3 not configured [ 1.0000040] /soc/bus@fe000000/pwm@5c000 at simplebus3 not configured [ 1.0000040] /sdio-32k at simplebus0 not configured [ 1.0000040] /opp_table at simplebus0 not configured [ 1.0000040] /soc/gpu@fe400000 at simplebus1 not configured [ 1.0000040] /soc/bus@fe000000/interrupt-controller@4080 at simplebus3 not configured [ 1.0000040] /soc/bus@fe000000/mdio-multiplexer@28000 at simplebus3 not configured [ 1.0000040] /soc/bus@fe000000/serial@78000 at simplebus3 not configured [ 1.0000040] /soc/bus@fe000000/rng@440788 at simplebus3 not configured [ 1.0000040] WARNING: system needs entropy for security; see entropy(7) [ 1.4013087] uhub0 at usb0: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 3.00/1.00, addr 0 [ 1.4013087] uhub1 at usb1: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 0 [ 1.8813227] umass0 at uhub1 port 1 configuration 1 interface 0 [ 1.8813227] umass0: SanDisk (0x0781) Ultra Fit (0x5583), rev 2.10/1.00, addr 1 [ 1.8813227] scsibus0 at umass0: 2 targets, 1 lun per target [ 1.8813227] sd0 at scsibus0 target 0 lun 0: <SanDisk, Ultra Fit, 1.00> disk removable [ 1.8813227] sd0: 29327 MB, 59585 cyl, 16 head, 63 sec, 512 bytes/sect x 60062500 sectors [ 1.8913246] dk0 at sd0: "EFI", 163840 blocks at 32768, type: msdos [ 1.8913246] dk1 at sd0: "netbsd-root", 59858944 blocks at 196608, type: ffs [ 1.8913246] swwdog0: software watchdog initialized [ 1.9013247] WARNING: 8 errors while detecting hardware; check system log. [ 1.9013247] boot device: <unknown> [ 1.9013247] root on dk1 [ 1.9113258] mountroot: trying ffs... [ 1.9113258] root file system type: ffs [ 1.9113258] kern.module.path=/stand/evbarm/11.99.6/modules