Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2026-11-14 16:33:03
From: racoon
Description: NetBSD/amd64 11.99.10 on IGEL M310C; VIA Nano U3400 thin client
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
    2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
    2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
    2024, 2025, 2026
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 11.99.10 (GENERIC) #0: Mon Nov  9 23:48:41 UTC 2026
	[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/amd64/compile/GENERIC
total memory = 446 MB
avail memory = 401 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
mainbus0 (root)
ACPI: RSDP 0x00000000000F7840 000014 (v00 VX855 )
ACPI: RSDT 0x000000001BEE3000 000038 (v01 VX855  AWRDACPI 42302E31 AWRD 00000000)
ACPI: FACP 0x000000001BEE3080 000074 (v01 VX855  AWRDACPI 42302E31 AWRD 00000000)
ACPI: DSDT 0x000000001BEE3100 00377C (v01 VX855  AWRDACPI 00001000 MSFT 03000000)
ACPI: FACS 0x000000001BEE0000 000040
ACPI: HPET 0x000000001BEE6900 000038 (v01 VX855  AWRDACPI 42302E31 AWRD 00000098)
ACPI: WDRT 0x000000001BEE6940 000047 (v01 VX855  AWRDACPI 42302E31 AWRD 00000000)
ACPI: MCFG 0x000000001BEE69C0 00003C (v01 VX855  AWRDACPI 42302E31 AWRD 00000000)
ACPI: APIC 0x000000001BEE6880 00005A (v01 VX855  AWRDACPI 42302E31 AWRD 00000000)
ACPI: 1 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x3, 24 pins
cpu0 at mainbus0 apid 0
cpu0: Use lfence to serialize rdtsc
cpu0: VIA Nano U3400@800MHz, id 0x6fa
cpu0: node 0, package 0, core 0, smt 0
acpi0 at mainbus0: Intel ACPICA 20260408
acpi0: X/RSDT: OemId <VX855 ,AWRDACPI,42302e31>, AslId <AWRD,00000000>
acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
acpi0: autoconfiguration error: no PCI bus range in _CRS, guessing 0-255 from MCFG
MPACPI PCI bus number 1 exceeds mpacpi_maxpci 1
acpi0: SCI interrupting at int 9
acpi0: fixed power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfe800000-0xfe800400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
spkr0 at pcppi1: PC Speaker
wsbell at spkr0 not configured
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
com0 at acpi0 (UAR1, PNP0501-1): io 0x3f8-0x3ff irq 4
com0: ns16550a, 16-byte FIFO
com1 at acpi0 (UAR2, PNP0501-2): io 0x2f8-0x2ff irq 3
com1: ns16550a, 16-byte FIFO
MEM (PNP0C01) at acpi0 not configured
acpiwdrt0 at acpi0: mem 0xfea00000,0xfea00004
acpiwdrt0: watchdog interval 1-1023 sec.
ACPI: Enabled 1 GPEs in block 00 to 0F
ACPI: Enabled 2 GPEs in block 10 to 1F
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: VIA Technologies VX855 Host Control (rev. 0x03)
pchb1 at pci0 dev 0 function 1: VIA Technologies VX855 Error Reporting (rev. 0x00)
pchb2 at pci0 dev 0 function 2: VIA Technologies VX855 Host Bus Control (rev. 0x00)
pchb3 at pci0 dev 0 function 3: VIA Technologies VX855 DRAM Bus Control (rev. 0x00)
pchb4 at pci0 dev 0 function 4: VIA Technologies VX855 Power Management Control (rev. 0x00)
VIA Technologies VX855 APIC and Central Traffic Control (interrupt system, IO(x) APIC) at pci0 dev 0 function 5 not configured
pchb5 at pci0 dev 0 function 6: VIA Technologies VX855 Scratch Registers (rev. 0x00)
pchb6 at pci0 dev 0 function 7: VIA Technologies VX855 North-South Module Interface Control (rev. 0x00)
vga0 at pci0 dev 1 function 0: VIA Technologies VX855/VX875 Chrome9 HCM IGP (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
pciide0 at pci0 dev 15 function 0: VIA Technologies VX855/VX875 EIDE Controller (rev. 0x00)
pciide0: bus-master DMA support present, but unused (no driver support)
pciide0: primary channel configured to compatibility mode
pciide0: primary channel interrupting at ioapic0 pin 14
atabus0 at pciide0 channel 0
pciide0: secondary channel configured to compatibility mode
pciide0: autoconfiguration error: secondary channel ignored (not responding; disabled or no drives?)
uhci0 at pci0 dev 16 function 0: VIA Technologies VT83C572 USB Controller (rev. 0xa0)
uhci0: interrupting at ioapic0 pin 20
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 16 function 1: VIA Technologies VT83C572 USB Controller (rev. 0xa0)
uhci1: interrupting at ioapic0 pin 22
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 16 function 2: VIA Technologies VT83C572 USB Controller (rev. 0xa0)
uhci2: interrupting at ioapic0 pin 21
usb2 at uhci2: USB revision 1.0
ehci0 at pci0 dev 16 function 4: VIA Technologies VT8237 EHCI USB Controller (rev. 0x90)
ehci0: 32-bit DMA
ehci0: interrupting at ioapic0 pin 23
ehci0: dropped intr workaround enabled
ehci0: EHCI version 1.0
ehci0: 3 companion controllers, 2 ports each: uhci0 uhci1 uhci2
ehci0: Using DMA subregion for control data structures
usb3 at ehci0: USB revision 2.0
pcib0 at pci0 dev 17 function 0: VIA Technologies VX855 Bus Control and Power Management (rev. 0x00)
pchb7 at pci0 dev 17 function 7: VIA Technologies VX8xx/VX900 South-North Module Interface Control (rev. 0x00)
ppb0 at pci0 dev 19 function 0: VIA Technologies VX8xx/VX900 PCI to PCI Bridge (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
re0 at pci1 dev 3 function 0: RealTek 8169SC/8110SC Single-chip Gigabit Ethernet (rev. 0x10)
re0: interrupting at ioapic0 pin 16
re0: RTL8169/8110SCd (0x1800)
re0: Ethernet address [_MAC_XXXXXXXXXX]
re0: using 1024 tx descriptors
rgephy0 at re0 phy 7: RTL8211B 1000BASE-T media interface
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
hdaudio0 at pci0 dev 20 function 0: HD Audio Controller
hdaudio0: interrupting at msi0 vec 0
hdaudio0: HDA ver. 1.0, OSS 4, ISS 4, BSS 0, SDO 1, 64-bit
hdafg0 at hdaudio0: VIA VT1708S
hdafg0: ADC00 2ch: Mic In [Jack]
hdafg0: DAC01 2ch: Speaker [Jack]
hdafg0: 2ch/2ch 48000Hz PCM16*
audio0 at hdafg0: playback, capture, full duplex, independent
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
spkr1 at audio0: PC Speaker (synthesized)
wsbell at spkr1 not configured
isa0 at pcib0
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat   0 us, pow     0 mW
acpicpu0: C2: I/O, lat  80 us, pow     0 mW
acpicpu0: C3: I/O, lat 800 us, pow     0 mW
acpicpu0: T0: I/O, lat   1 us, pow     0 mW, 100 %
acpicpu0: T1: I/O, lat   1 us, pow     0 mW,  50 %
viac7temp0 at cpu0: VIA C7/Nano temperature sensor
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
IPsec: Initialized Security Association Processing.
uhub0 at usb0: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
ehci0: handing over full speed device on port 1 to uhci0
uhub4 at uhub3 port 6: vendor 05e3 (0x05e3) USB2.0 Hub (0x0608), class 9/0, rev 2.00/77.63, addr 2
uhub4: single transaction translator
uhub4: 4 ports with 4 removable, self powered
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: Keychron (0x3434) Keychron V1 (0x0311), rev 2.00/1.07, addr 2, iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub0 port 1 configuration 1 interface 1
uhidev1: Keychron (0x3434) Keychron V1 (0x0311), rev 2.00/1.07, addr 2, iclass 3/0
uhid0 at uhidev1: input=32, output=32, feature=0
uhidev2 at uhub0 port 1 configuration 1 interface 2
uhidev2: Keychron (0x3434) Keychron V1 (0x0311), rev 2.00/1.07, addr 2, iclass 3/0
uhidev2: 6 report ids
ums0 at uhidev2 reportid 2: 8 buttons, W and Z dirs
wsmouse0 at ums0 mux 0
uhid1 at uhidev2 reportid 3: input=2, output=0, feature=0
ukbd1 at uhidev2 reportid 4
wskbd2 at ukbd1 mux 1
wskbd2: connecting to wsdisplay0
ukbd2 at uhidev2 reportid 6
wskbd3 at ukbd2 mux 1
wskbd3: connecting to wsdisplay0
wd0 at atabus0 drive 0
wd0: <TS128GCF800>
wd0: drive supports 1-sector PIO transfers, LBA48 addressing
wd0: 119 GB, 264640 cyl, 15 head, 63 sec, 512 bytes/sect x 250085376 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 7
swwdog0: software watchdog initialized
WARNING: 2 errors while detecting hardware; check system log.
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/amd64/11.99.10/modules
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)